Skip to main content
Skip to main content
Product title:

Traeger Induction Air Fan (Non-D2 Controller Models): KIT0019 / FAN250-AMP

Product rating:
Product price:
$24.99

A $20.00 Savings over the OEM

Product SKU ! FAN209-AMP
Product MPN ! FAN250
Product availability: In Stock
Bullet point features
'Product works great. Showed up when it said it was going to bolted right on and works perfectly"- Cory S.

Frequently Bought Together

Description

Replacement Induction Air Fan For Pellet Grills Without D2 Direct Drive.

This is the fan motor that is responsible for supplying the grill with air, which is needed to burn the pellets. This fan is located inside the mechanical area inside the hopper burner assembly.

  • This fan motor is NOT used on any grill that has the hopper mounted on the right-side of the unit.
  • All of the portable grills, Scout, Ranger, PTG+ use FAN209-R, which as only 3 support arms.


Replacement For Part Numbers:

  • FAN250
  • KIT0019
  • KIT0469

View Compatible Models

UPC: 634868918995

Compatible Models

    Traeger

  • Bronson 20
  • Century 22
  • Century 34
  • Century
  • Deluxe Elite 300
  • Double Commercial
  • Eastwood 22
  • Eastwood 34
  • Executive
  • Fremont
  • Heartland
  • Homestead 520
  • Junior 20
  • Junior Elite 20
  • Large Commercial Trailer
  • Lil Tex Limited Edition
  • Lil Tex
  • Lil Pig
  • Lil Tex Elite 22
  • Lonestar 20
  • Lonestar
  • Longhorn Steer
  • Mesa 20
  • Mesa 22
  • Pro 20
  • Pro Series 22
  • Pro Series 34
  • Professional
  • PTG Limited Edition
  • Ranger
  • Renegade Elite 20
  • Renegade Pro
  • Ridgeland 572
  • Roll Top
  • Scout
  • Select Elite
  • Select Pro
  • Silverton
  • Tailgater 20
  • Texas Elite 34
  • Texas Elite
  • Texas Limited Edition
  • Texas
  • Texas Pro
  • Timberline 1300 AC
  • Timberline 850 AC
  • Trailhead
  • XL

Technical Specs

Volts 120
Amps ~.25
Wiring Connectors 2 Pin Molex
Cycles 60Hz

Instructions

Install Instructions For Traeger Induction Air Fan (Non-D2 Controller Models): KIT0019 / FAN250-AMP
  1. Unplug your grill from the power.
  2. The induction fan is located under the hopper. It faces upward, is usually white, and has orange wires leading to it. Unplug the orange wire Molex connector only.
  3. Remove the 4 mounting screws that hold the Traeger draft induction fan using a ¼” wrench or nut driver.
  4. Pull the fan out of the motor area from underneath the hopper.
  5. Install the replacement induction fan using the original 4 mounting screws.
  6. Plug the orange wire Molex connector back together.

Troubleshooting

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Replacement Induction Air Fan For Pellet Grills Without D2 Direct Drive.

This is the fan motor that is responsible for supplying the grill with air, which is needed to burn the pellets. This fan is located inside the mechanical area inside the hopper burner assembly.

  • This fan motor is NOT used on any grill that has the hopper mounted on the right-side of the unit.
  • All of the portable grills, Scout, Ranger, PTG+ use FAN209-R, which as only 3 support arms.


Replacement For Part Numbers:

  • FAN250
  • KIT0019
  • KIT0469

View Compatible Models

UPC: 634868918995

Compatible Models

    Traeger

  • Bronson 20
  • Century 22
  • Century 34
  • Century
  • Deluxe Elite 300
  • Double Commercial
  • Eastwood 22
  • Eastwood 34
  • Executive
  • Fremont
  • Heartland
  • Homestead 520
  • Junior 20
  • Junior Elite 20
  • Large Commercial Trailer
  • Lil Tex Limited Edition
  • Lil Tex
  • Lil Pig
  • Lil Tex Elite 22
  • Lonestar 20
  • Lonestar
  • Longhorn Steer
  • Mesa 20
  • Mesa 22
  • Pro 20
  • Pro Series 22
  • Pro Series 34
  • Professional
  • PTG Limited Edition
  • Ranger
  • Renegade Elite 20
  • Renegade Pro
  • Ridgeland 572
  • Roll Top
  • Scout
  • Select Elite
  • Select Pro
  • Silverton
  • Tailgater 20
  • Texas Elite 34
  • Texas Elite
  • Texas Limited Edition
  • Texas
  • Texas Pro
  • Timberline 1300 AC
  • Timberline 850 AC
  • Trailhead
  • XL

Technical Specs

Volts 120
Amps ~.25
Wiring Connectors 2 Pin Molex
Cycles 60Hz

Instructions

Install Instructions For Traeger Induction Air Fan (Non-D2 Controller Models): KIT0019 / FAN250-AMP
  1. Unplug your grill from the power.
  2. The induction fan is located under the hopper. It faces upward, is usually white, and has orange wires leading to it. Unplug the orange wire Molex connector only.
  3. Remove the 4 mounting screws that hold the Traeger draft induction fan using a ¼” wrench or nut driver.
  4. Pull the fan out of the motor area from underneath the hopper.
  5. Install the replacement induction fan using the original 4 mounting screws.
  6. Plug the orange wire Molex connector back together.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 72 reviews
99%
(71)
1%
(1)
0%
(0)
0%
(0)
0%
(0)
J
Joe H.
Fan motor

Good price and fast delivery!

C
Clifford S.
Pellet Grill Fan

I ordered a new blower fan for my Grilla Grill Silverback. It arrived quickly and was a perfect fit. I will be really happy if it lasts as long as the original one.

B
Brian B.
Fit perfectly

Installed with no issues on my Rec Tec 680

M
Matt A.

Grilla Pellet Grill Fan

J
Joseph G.
Fan motors is working great so far, just installed this weekend.

Fan motor and digital control installed without any complications. It's only been a couple of days and working great so far, will be giving an update in a couple of weeks.

123

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 72 reviews
99%
(71)
1%
(1)
0%
(0)
0%
(0)
0%
(0)
J
Joe H.
Fan motor

Good price and fast delivery!

C
Clifford S.
Pellet Grill Fan

I ordered a new blower fan for my Grilla Grill Silverback. It arrived quickly and was a perfect fit. I will be really happy if it lasts as long as the original one.

B
Brian B.
Fit perfectly

Installed with no issues on my Rec Tec 680

M
Matt A.

Grilla Pellet Grill Fan

J
Joseph G.
Fan motors is working great so far, just installed this weekend.

Fan motor and digital control installed without any complications. It's only been a couple of days and working great so far, will be giving an update in a couple of weeks.

123
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid