Skip to main content
Skip to main content
Product title:

US Stove (Multi-Fuel) Furnace Exhaust Blower Assembly: 80495

Product rating:
Product price:
Save 15%
$329.99
$280.49
Product SKU ! 80495
Product MPN ! 80495
Product availability: In Stock
Bullet point features
Buy Now Pay Later

Have a Question? Contact Us 24/7 to Ask a Specialist

  • FREE Shipping

    Orders over $99

  • 30-Day Returns

    Hassle free return policy

  • 90-Day Warranty

    Included with purchase

  • Same-Day Shipping

    On most items*

Frequently Bought Together

Total Price: $300.48

Description

USSC (Multi-Fuel) Furnace Exhaust Blower Assembly: 80495.  The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air into the furnace. If the blower is not running as it should, smoke/flue gas may enter the room.  You may also notice a lazy flame and a poor burn as a result of inadequate combustion air being delivered to the fire.


Replacement For Part Number:

  • 80495

UPC: 012685804958

Compatible Models

Technical Specs

Voltage 120
Power type AC
RPM (Rotations/Minute) 3000
Rotation Direction Clockwise
Wire Connectors Two Female Spades
Shaft Diameter 1/4"
Shaft Length 1 13/16"

Instructions

Install Instructions For US Stove (Multi-Fuel) Furnace Exhaust Blower Assembly: 80495

Instructional Documents:

1.) Unplug the unit and make sure it is cool to the touch.

2.) Remove the necessary panels from the furnace (You may need to remove the rear and side panels).

3.) Next, remove or unplug your RDT temp sensor and disconnect the power wires leading to the draft blower.

4.) Remove the screws attaching the blower housing to the unit and remove the blower assembly (You may need to disconnect the exhaust pipe from the unit).

5.) Remove the old gasket (Using a flathead screwdriver, scrape and remove any pieces of old gasket stuck to the housing or body of the unit).

6.) Position the new gasket in place.

7.) Set the new assembly in place and reinstall the previously removed screws.

8.) Reconnect the RDT temp sensor and power wires.

9.) Reconnect and seal the exhaust (If it was removed) & reinstall any previously removed panels.

10.) Run a brief test burn to confirm the unit is operating as it should.

Troubleshooting

-The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air into the furnace. If you notice smoke/flue gas entering the room or a lazy flame, this may be a sign that the combustion blower is not operating as it should. If you have thoroughly cleaned the unit/venting but are still experiencing these issues, you may want to consider replacing your blower!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

USSC (Multi-Fuel) Furnace Exhaust Blower Assembly: 80495.  The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air into the furnace. If the blower is not running as it should, smoke/flue gas may enter the room.  You may also notice a lazy flame and a poor burn as a result of inadequate combustion air being delivered to the fire.


Replacement For Part Number:

  • 80495

UPC: 012685804958

Technical Specs

Voltage 120
Power type AC
RPM (Rotations/Minute) 3000
Rotation Direction Clockwise
Wire Connectors Two Female Spades
Shaft Diameter 1/4"
Shaft Length 1 13/16"

Instructions

Install Instructions For US Stove (Multi-Fuel) Furnace Exhaust Blower Assembly: 80495

Instructional Documents:

1.) Unplug the unit and make sure it is cool to the touch.

2.) Remove the necessary panels from the furnace (You may need to remove the rear and side panels).

3.) Next, remove or unplug your RDT temp sensor and disconnect the power wires leading to the draft blower.

4.) Remove the screws attaching the blower housing to the unit and remove the blower assembly (You may need to disconnect the exhaust pipe from the unit).

5.) Remove the old gasket (Using a flathead screwdriver, scrape and remove any pieces of old gasket stuck to the housing or body of the unit).

6.) Position the new gasket in place.

7.) Set the new assembly in place and reinstall the previously removed screws.

8.) Reconnect the RDT temp sensor and power wires.

9.) Reconnect and seal the exhaust (If it was removed) & reinstall any previously removed panels.

10.) Run a brief test burn to confirm the unit is operating as it should.

Troubleshooting

-The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air into the furnace. If you notice smoke/flue gas entering the room or a lazy flame, this may be a sign that the combustion blower is not operating as it should. If you have thoroughly cleaned the unit/venting but are still experiencing these issues, you may want to consider replacing your blower!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customers Also Bought

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
K
Karl S.
Double check gasket requirement

Disassembly destroys original gasket .. make sure a new one is included or ordered

R
Rusty M.
Couldn’t believe it came so fast.

I ordered an exhaust blower fan and gasket. Shipping said it could take up to 5-7 days I believe. I had it in 2-3 days. Would highly recommend. Package was neatly packed.

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
K
Karl S.
Double check gasket requirement

Disassembly destroys original gasket .. make sure a new one is included or ordered

R
Rusty M.
Couldn’t believe it came so fast.

I ordered an exhaust blower fan and gasket. Shipping said it could take up to 5-7 days I believe. I had it in 2-3 days. Would highly recommend. Package was neatly packed.