Install Instructions For USSC Pellet Stove (Door/Hopper) Micro Switch (C-E-901): 80491
1.) Unplug the power from the unit.
2.) Remove any panels needed to access the switch.
3.) Locate the lid/door switch.
4.) Remove the fasteners holding the switch housing in place.
5.) Disconnect the wires from the existing switch (Pay attention to the prongs the wires connect to on the switch. The wires can be reversed, but you must connect to the correct prongs for the switch to operate as it's supposed to).
6.) Install the new switch with the previously removed fasteners.
7.) Connect the wires to the new switch (Make sure you're connecting to the correct prongs).
8.) Reinstall any previously removed panels.
9.) Plug in the unit and run a test start to confirm the switch is functioning as it should.