Skip to main content
Skip to main content
Product title:

Vogelzang Exhaust Blower Gasket: 88100

Product rating:
Product price:
$7.99
Product SKU ! 88100 (VOG)
Product MPN ! 88100
Product availability: In Stock
Bullet point features
Pack-Size

Description

Vogelzang Pellet Stove Exhaust Blower Gasket. This gasket seals between the exhaust blower housing and the unit.  It is important to inspect this seal periodically to make sure it is in good shape.  If the gasket shows signs of deterioration or you notice stains on the gasket it should be replaced!  Running your stove with a bad gasket may allow smoke to enter the room. 


Replacement For Part Number:

  • 88100

View Compatible Models

UPC: 012685881003

Compatible Models

    Vogelzang

  • VG130
  • VG5717-P
  • VG5722

Technical Specs

Size Approximately 8" x 7 1/4"
Thickness 1/8"
Inner Diameter 4 7/8"

Instructions

Install Instructions For Vogelzang Exhaust Blower Gasket: 88100
  1. Unplug the unit.
  2. Remove the necessary panels to access the blower and disconnect the venting (May require removal of the rear and side panels).
  3. Locate the exhaust blower assembly.
  4. Loosen the bolts attaching the housing to the stove (You may be able to support the blower during this step. If there is not enough slack in the leads running to the blower or any low-limit switch attached to the blower housing disconnect the wires at this time).
  5. Remove the old gasket.
  6. Position the new gasket in place, line up your blower, and start to thread the previously removed bolts into place and tighten completely.
  7. Reattach any previously disconnected wires.
  8. Reinstall the venting and vent adapter (If they were previously removed).
  9. Install any previously removed panels.
  10. Plug in the unit and test the blower.



NOTE: If the venting was removed, make sure to apply high-temperature RTV silicone at the connection point when reinstalling and replace any previously removed screws. If the venting adapter was removed from the blower housing make sure this connection point is also sealed with a high temp silicone and secured with the proper self-tapping screw(s).

Troubleshooting

 -This gasket seals between the exhaust blower housing and the unit. It is important to inspect this seal periodically to make sure it is in good shape. If the gasket shows signs of deterioration or you notice stains on the gasket it should be replaced. Running your stove with a bad gasket may allow smoke to enter the room.   


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $49!

HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

  • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
  • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE

Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Vogelzang Pellet Stove Exhaust Blower Gasket. This gasket seals between the exhaust blower housing and the unit.  It is important to inspect this seal periodically to make sure it is in good shape.  If the gasket shows signs of deterioration or you notice stains on the gasket it should be replaced!  Running your stove with a bad gasket may allow smoke to enter the room. 


Replacement For Part Number:

  • 88100

View Compatible Models

UPC: 012685881003

Technical Specs

Size Approximately 8" x 7 1/4"
Thickness 1/8"
Inner Diameter 4 7/8"

Instructions

Install Instructions For Vogelzang Exhaust Blower Gasket: 88100
  1. Unplug the unit.
  2. Remove the necessary panels to access the blower and disconnect the venting (May require removal of the rear and side panels).
  3. Locate the exhaust blower assembly.
  4. Loosen the bolts attaching the housing to the stove (You may be able to support the blower during this step. If there is not enough slack in the leads running to the blower or any low-limit switch attached to the blower housing disconnect the wires at this time).
  5. Remove the old gasket.
  6. Position the new gasket in place, line up your blower, and start to thread the previously removed bolts into place and tighten completely.
  7. Reattach any previously disconnected wires.
  8. Reinstall the venting and vent adapter (If they were previously removed).
  9. Install any previously removed panels.
  10. Plug in the unit and test the blower.



NOTE: If the venting was removed, make sure to apply high-temperature RTV silicone at the connection point when reinstalling and replace any previously removed screws. If the venting adapter was removed from the blower housing make sure this connection point is also sealed with a high temp silicone and secured with the proper self-tapping screw(s).

Troubleshooting

 -This gasket seals between the exhaust blower housing and the unit. It is important to inspect this seal periodically to make sure it is in good shape. If the gasket shows signs of deterioration or you notice stains on the gasket it should be replaced. Running your stove with a bad gasket may allow smoke to enter the room.   


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $49!

HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

  • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
  • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE

Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 91 reviews
98%
(89)
2%
(2)
0%
(0)
0%
(0)
0%
(0)
H
Heather P.
Review

We always get our order in great time!

M
Michael E.S.S.
Whitefield Exhaust Blower Gasket

Exact fit ! Placed and installed new exhaust blower motor. Worked perfectly.

D
Danny C.

Excellent product

D
Dale B.
GASKET

FAST SHIPPING CORRECT PART WE ARE ALL GOOD HERE

R
Richard R.W.j.
New gasket

Stove and grill parts are top knotch very happy

123

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 91 reviews
98%
(89)
2%
(2)
0%
(0)
0%
(0)
0%
(0)
H
Heather P.
Review

We always get our order in great time!

M
Michael E.S.S.
Whitefield Exhaust Blower Gasket

Exact fit ! Placed and installed new exhaust blower motor. Worked perfectly.

D
Danny C.

Excellent product

D
Dale B.
GASKET

FAST SHIPPING CORRECT PART WE ARE ALL GOOD HERE

R
Richard R.W.j.
New gasket

Stove and grill parts are top knotch very happy

123
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid