Skip to main content
Skip to main content
Product title:

Vogelzang Exhaust Blower: 80473

Product rating:
Product price:
Product SKU ! 80473 (VOG)
Product MPN ! 80473
Bullet point features

Frequently Bought Together

Total Price: $447.96


Vogelzang Pellet Stove OEM Exhaust Blower.  The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air into the stove.  It is important that the blower functions properly.  If the blower is not running as it should, smoke/flue gas may enter the room.  You may also notice a lazy flame and a poor burn as a result of inadequate combustion air being delivered to the fire. 

*Gasket 88100 not included!*

    Replacement For Part Number:

    • 80473

    View Compatible Models

    UPC: 12685804736

    Compatible Models


    • VG130
    • VG5722

    Technical Specs

    Volts 115
    Cycles 60Hz
    Amps 0.69
    RPM 2894
    Wiring Connectors (2) 1/4" Female Wire Leads



    Install Instructions For Vogelzang Exhaust Blower: 80473

    To replace the exhaust blower:

    1. Unplug the unit
    2. Open the service panel
    3. Locate the exhaust blower. If your unit has the original OEM blower, you may have to remove the entire blower assembly if the motor cannot be removed from the hub. This will also involve removing the vent from the end of the assembly. If you have a Breckwell Insert, you will need to remove the entire off-set assembly from the of blower assembly and attach it to the new assembly if you have a hub-less motor.
    4. Disconnect wiring
    5. Replace blower assembly along with any gaskets that were disturbed (included).
    6. Reconnect venting if it was disconnected
    7. Reattach the wiring
    8. NOTE: if the venting was removed, make sure to apply RTV silicone to the venting adapter and secure with a single self tapping screw.