Ashley Ceramic Fiber Board & Blanket Kit: 88158-AMP

Replacement Ashley Wood Stove Ceramic Baffle Board and Blanket. The baffle boards and blanket are important parts of your unit. They redirect flue gases inside the stove and increase the temperature of the re-burn tubes. When the tubes become "superheated," they will start to re-burn excess smoke and flue gas, increasing your stoves efficiency.

The board also protects the top of the stove/insert from direct contact with the flame.  If the board is deteriorated or you notice large cracks forming it should be replaced.  You should not operate your stove without a functional baffle board and blanket in place! 

This kit includes:

• 88158 - Front Board
• 88159 - Rear Board
• 88160 - Ceramic Blanket

 

Replacement For Part Numbers:

• 88158
• 88159
• 88160

UPC: 012685881584

Material	Superwool Plus board
Front Board Dimensions	20 5/8" x 6 1/4" x 1/2"
Rear Board Dimensions	20 5/8" x 5 5/8" x 1/2"
Blanket Dimensions	22" x 12"

Install Instructions For Ashley Ceramic Fiber Board & Blanket Kit: 88158-AMP

1.) Make sure the fire is completely out and your stove is cool to the touch.

2.) Open the main load door.

3.) Locate the retainer clip and bolt on the first reburn tube.

4.) On most stoves 1-2 of the reburn tubes will need to be removed in order to take out the baffle board and blanket (On some units, you may be able to carefully remove these items without removing any of the tubes).

5.) Spray the bolts holding the retainer clips in place with penetrating oil and let them sit (PB Blaster or WD40 works well).

6.) Remove the first 1-2 retainer clips and reburn tubes (Normally, this will give you enough room to remove the baffle and blanket).

7.) Slide the old baffle and blanket out.

8.) Position the new baffle and blanket in place (Make sure the new baffle and blanket are positioned correctly. If they are too far forward it may cause issues with the burn).

9.) Reinstall any previously removed tubes and retain clips.

10.) Close the door.

-The baffle board and blanket are important parts of your stove/insert. The main purpose of these parts is to cause the reburn tubes to become superheated. When this happens, unburned smoke and flue gases traveling past the tubes ignite, increasing your stove's efficiency. The board and blanket also protect the top of your stove/insert from direct contact with the flame. If your unit is not burning as it should, check to make sure that the board and blanket are positioned correctly.

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

This Item Qualifies For Free Shipping With Orders Over $99!

Learn More About Our Shipping Information