Skip to main content
Skip to main content
Product title:

HearthstoneMansfield 8010 & 8011 Gasket Kit: 90-57001

Product rating:
Product price:
$34.99
Product SKU ! 90-57001
Product MPN ! 90-57001
Only 1 Left In Stock
Bullet point features

Frequently Bought Together

Description

Hearthstone Wood Stove Gasket Kit for Mansfield 8010 & 80112.  It is important to periodically inspect the door and glass gasket on your wood stove.  A missing or deteriorated gasket can allow smoke to enter the room, reduce your stoves efficiency and cause the stove to over fire.    

Kit Includes:

  • 3 Feet: 3/8” Diameter Rope Gasket Med. Density (Ash Door)
  • 5 Feet: 3/8” Diameter Rope Low Density (Front Door)
  • 5 Feet: 3/4" Flat Tape Gasket (Glass)

Replacement For Part Number:

  • 90-57001

Compatible Models

    Hearthstone

  • Manchester I
  • Mansfield I
  • Mansfield II
  • Mansfield III
  • Mansfield

Technical Specs

Silicone Yes

Instructions

Install Instructions For HearthstoneMansfield 8010 & 8011 Gasket Kit: 90-57001

GLASS & GLASS GASKET REPLACEMENT

1. Remove the door by opening it about 90° and lifting it straight up off the hinges with the hinge pins remaining in the door.

2. Place the door face down on a flat, smooth surface, other than the floor, with the handle hanging over an edge.

3. Apply penetrating oil to the screws in the glass retainer clips. Remove the screws to separate the glass from the door.

4. Carefully lift the damaged glass and/or old gasket from the doorframe and discard it (Pay special attention to how the gasket is installed on the glass or door frame).

5. Peel the paper backing from the tape gasket. Apply the new gasket to the glass or doorframe.

6. Place the glass into the door frame. Place the clips and gasket squares (Gasket squares go under the clips) around the glass, and over the screw holes in the clip.

7. Screw the glass retainer clips back on the door.

8. Install the door. 


DOOR GASKET REPLACEMENT:

1. Start by removing the door from the stove.

2. Place the door face down on a soft, flat, and even surface.

3. Remove the old gasket (After the gasket is removed make sure you clean or scrape away an old adhesive. It is imperative that the channel is cleaned before applying the new cement or silicone).

4. Apply a generous bead of gasket cement or silicone into the channel where the new gasket will sit.

5.) Starting on one end of the channel gently position the gasket in place (The gasket will fill the entire channel and butt together on one end. It is better to have more gasket than you need. You can trim any excess gasket at the end if necessary).

6.) Let the gasket set (Read the instructions on the back of the cement/silicone. Some gasket cement/silicone needs to sit for a predetermined amount of time before the door is reattached to the unit).

7.) Reinstall the door (Some adhesives will require the stove to be burned at a certain temperature for a period of time to cure the gasket. Check the instructions on the adhesive you're using to confirm).

Troubleshooting

Helpful Tips:

If you need to remove the door gasket, glass, or glass gasket it is a good idea to spray any fasteners with a product like WD40 or PB Blaster prior to this step. This will greatly reduce the possibility of stripping or breaking any screws/bolts during removal. When reinstalling the glass tighten the fasteners in a crisscross pattern. This will help to ensure there is even pressure on the glass (Do not overtighten).  



Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $49!

HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

  • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
  • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE

Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Hearthstone Wood Stove Gasket Kit for Mansfield 8010 & 80112.  It is important to periodically inspect the door and glass gasket on your wood stove.  A missing or deteriorated gasket can allow smoke to enter the room, reduce your stoves efficiency and cause the stove to over fire.    

Kit Includes:

  • 3 Feet: 3/8” Diameter Rope Gasket Med. Density (Ash Door)
  • 5 Feet: 3/8” Diameter Rope Low Density (Front Door)
  • 5 Feet: 3/4" Flat Tape Gasket (Glass)

Replacement For Part Number:

  • 90-57001

Technical Specs

Silicone Yes

Instructions

Install Instructions For HearthstoneMansfield 8010 & 8011 Gasket Kit: 90-57001

GLASS & GLASS GASKET REPLACEMENT

1. Remove the door by opening it about 90° and lifting it straight up off the hinges with the hinge pins remaining in the door.

2. Place the door face down on a flat, smooth surface, other than the floor, with the handle hanging over an edge.

3. Apply penetrating oil to the screws in the glass retainer clips. Remove the screws to separate the glass from the door.

4. Carefully lift the damaged glass and/or old gasket from the doorframe and discard it (Pay special attention to how the gasket is installed on the glass or door frame).

5. Peel the paper backing from the tape gasket. Apply the new gasket to the glass or doorframe.

6. Place the glass into the door frame. Place the clips and gasket squares (Gasket squares go under the clips) around the glass, and over the screw holes in the clip.

7. Screw the glass retainer clips back on the door.

8. Install the door. 


DOOR GASKET REPLACEMENT:

1. Start by removing the door from the stove.

2. Place the door face down on a soft, flat, and even surface.

3. Remove the old gasket (After the gasket is removed make sure you clean or scrape away an old adhesive. It is imperative that the channel is cleaned before applying the new cement or silicone).

4. Apply a generous bead of gasket cement or silicone into the channel where the new gasket will sit.

5.) Starting on one end of the channel gently position the gasket in place (The gasket will fill the entire channel and butt together on one end. It is better to have more gasket than you need. You can trim any excess gasket at the end if necessary).

6.) Let the gasket set (Read the instructions on the back of the cement/silicone. Some gasket cement/silicone needs to sit for a predetermined amount of time before the door is reattached to the unit).

7.) Reinstall the door (Some adhesives will require the stove to be burned at a certain temperature for a period of time to cure the gasket. Check the instructions on the adhesive you're using to confirm).

Troubleshooting

Helpful Tips:

If you need to remove the door gasket, glass, or glass gasket it is a good idea to spray any fasteners with a product like WD40 or PB Blaster prior to this step. This will greatly reduce the possibility of stripping or breaking any screws/bolts during removal. When reinstalling the glass tighten the fasteners in a crisscross pattern. This will help to ensure there is even pressure on the glass (Do not overtighten).  



Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $49!

HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

  • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
  • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE

Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Joe C.
Quick responses to multiple questions

Quick responses to multiple questions Great customer service shipping seemed fine but really the best part is that you ask a question and you get a helpfu answer early the next day

D
Don M.
Reliable

Site was easy to find parts, good price and shipment was fast! Impressed!

m
michael m.
Right Parts Quick

Door gasket is just what I needed to bring my 25 year old Mansfield back to working like new. Fast delivery too.

A
Anonymous
Hearthstone Mansfield 8010/8011 Gasket Kit

Easy to install. Pre measured gasket, applied adhesive to door and installed gasket. Gasket came up a bit short, so had to remove part of it and reinstall. Next time I would mark the gasket, when I pre measured, at the corners of the channel so I could gauge how I was doing when I did the actual installation

M
Martha B.
Gasket installation a breeze

This is only the second time in 20 years I had to replace the Gaskets on our stove. Our stove is the only heat source we use in winter, propane is used in early fall and late spring.

I cleaned out the old gasket with a phillips screwdriver, I removed the paper strip that covers the glue tape, put the gasket into the cleaned groove, cut the last 3 inches off, so they are plenty long, you don't have to stretch them, that's it.

At first the doors are hard to close, my husband had do it, after the gaskets were compressed over-night, I was able to close the doors by myself. Did a test fire, no escaped smoke. It took me longer to clean up the mess I made removing the old gaskets, then installing the gaskets. The Silicon and window gasket that come with the kit I did not needed, but you never know, I have it, just in case I ever do.

I believe in this product, it does the job!

Martha
from Northern Michigan

Michigan winters ranked 2nd most brutal in country.

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Joe C.
Quick responses to multiple questions

Quick responses to multiple questions Great customer service shipping seemed fine but really the best part is that you ask a question and you get a helpfu answer early the next day

D
Don M.
Reliable

Site was easy to find parts, good price and shipment was fast! Impressed!

m
michael m.
Right Parts Quick

Door gasket is just what I needed to bring my 25 year old Mansfield back to working like new. Fast delivery too.

A
Anonymous
Hearthstone Mansfield 8010/8011 Gasket Kit

Easy to install. Pre measured gasket, applied adhesive to door and installed gasket. Gasket came up a bit short, so had to remove part of it and reinstall. Next time I would mark the gasket, when I pre measured, at the corners of the channel so I could gauge how I was doing when I did the actual installation

M
Martha B.
Gasket installation a breeze

This is only the second time in 20 years I had to replace the Gaskets on our stove. Our stove is the only heat source we use in winter, propane is used in early fall and late spring.

I cleaned out the old gasket with a phillips screwdriver, I removed the paper strip that covers the glue tape, put the gasket into the cleaned groove, cut the last 3 inches off, so they are plenty long, you don't have to stretch them, that's it.

At first the doors are hard to close, my husband had do it, after the gaskets were compressed over-night, I was able to close the doors by myself. Did a test fire, no escaped smoke. It took me longer to clean up the mess I made removing the old gaskets, then installing the gaskets. The Silicon and window gasket that come with the kit I did not needed, but you never know, I have it, just in case I ever do.

I believe in this product, it does the job!

Martha
from Northern Michigan

Michigan winters ranked 2nd most brutal in country.

Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid