Install Instructions For Hearthstone Wood Stove Glass Kit (Craftsbury 8392): 93-58925
1. Remove the door.
2. Remove the screws from the glass clips (use penetrating oil if necessary) – Set aside for re-installation.
3. Carefully lift the damaged glass off the door and discard.
4. Remove any remaining glass and old gasket material.
5. Clean the screw holes and place a small amount of anti-seize compound in each one.
6. Install a new glass gasket in the glass gasket groove.
7. Place the new glass onto the door.
8. Important! Center the glass and ensure that the edges of the glass are parallel with the edges of the opening.
9. Check glass position again (centered, and parallel), then screw the glass retainer clips with the glass pads back on the door using a crisscross pattern. Tighten the screws no more than 1/8th of a turn after they seat. The glass will break at this point if not positioned correctly.
10. Apply a light film of anti-seize lubricant on the door’s hinge pins if needed.
11. Install the door.
12. After 5 or 6 fires, check the glass retainer screws, and re-tighten if necessary.