Jotul F400 Castine & F3 CB Black Handle Kit: 154631

Jotul

• F3 CB
• F400 Castine
• F400 Double Door

To install the new door handle, assemble the handle like what you in in the attached pictures with the latch bolt on the inside of the door pointing to 9 O'clock and the washer, spring, and cast iron crank on the outside of the door with the cast iron crank pointing down. Once you are sure about the alignment insert the roll pin in the cast iron crank and tighten it with a 3mm Allen wench. Once the handle is installed you can then install the wood knob by inserting the bolt and sleeve into the wood knob with the fiber washer positioned between the wood knob and the cast crank. Using a screwdriver tighten the screw while holding the washer and nut on the back side of the cast crank.



Before removing the old door handle please take a picture of how the door latch bolt on the inside of the stove is orientated to the cast iron door crank on the outside of the door. The steel shaft should be pointing the the left when the cast iron crank is pointing down. If you have a roll pin holding the cast iron crank to the shaft you will have to remove your old door handle by cutting the latch bolt on the inside of the door with a hacksaw.

This Item Qualifies For Free Shipping With Orders Over $199!