US Stove Company (Wood/Coal) Furnace Back Liner: 40313

(USSC) Wood/Coal Furnace (Back) Liner.  This liner is designed to help protect the interior of the firebox.  It acts as a buffer between the flame and the inside of the unit. It may serve as a front or rear liner, depending on what furnace you have (Check your manual to confirm placement in your unit). 

UPC: 012685403137

Replacement For Part Number:

• 40313

These are all of the confirmed compatible units for this product. Where To Find Your Make & Model

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

Install Instructions For US Stove Company (Wood/Coal) Furnace Back Liner: 40313

Instructional Notes

1.) Loosen the two bolts above the main load door attaching the hooks to the smoke curtain.

2.) Slide the hooks out of place and remove the smoke curtain.

3.) Remove the first few bricks on each side of the firebox (Pay attention to their location and position).

4.) Remove the liner by sliding it out and up (If you are replacing a back liner the same steps will be followed).

5.) Position the new liner inside the furnace and slide it down into place.

6.) Reposition any previously removed firebrick.

7.) Reattach the hooks and smoke curtain.

8.) Tighten the two bolts that secure the smoke curtain hooks in place.

Troubleshooting Notes

The firebox liner is an important part of your furnace. The liner acts as a buffer, protecting the interior of the firebox from direct contact with the flame. You should periodically inspect the liners. If you notice holes, warping, or cracks forming the liner(s) should be replaced!

This Item Qualifies For Free Shipping!