Vermont Castings Dutchwest Consolidated Large 2479 non-cat Glass Kit: 30002157-AMP

Replacement Glass Kit For Select Vermont Castings Wood Stoves. The kit includes the glass 30002157, glass gasket, glass cleaner, clips and hardware.

Replacement For Models: Consolidated Large #2479 non-cat

Dimensions: 17-3/4" × 11-3/4"

A Note About Our Glass: Unlike some manufacturers, we do not use tempered glass. Tempered glass should NEVER be used in a wood fuel stove, it is not suitable for high heat use. Our glass is made to resist very high temperatures up to 1,400° F / 760° C with low thermal expansion.

UPC: 652174888481

Replacement For Part Number:

• 30002157

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

This product is a kit containing 2 total items.

Component Technical Specs

Open a part to see its specifications.

1 xDutchwest Consolidated Large #2479 non-cat Glass, 30002157

SKU 30002157-AMP (opens in new tab)

Quantity In Kit	1
Length (in)	17 ¾"
Width (in)	11 ¾"
Thickness (in)	0.188"
Max Temp (F)	1400
Weight	3.25 oz

1 xVermont Castings Glass Installation & Maintenance Kit for 30002097

SKU INSTALLATION KIT FOR 30002097 (opens in new tab)

Quantity In Kit	1

• Always use the factory recommended gaskets and fasteners to secure the glass in your stove. Some of our glass comes with gasket, others do not, please order accordingly.
• Every stove is different, when removing your old glass, pay attention to the system your stoves uses to secure the glass. Take pictures of your old glass in stages as you remove it from the stove so that you have a reference of how the new glass needs to be reinstalled.
• Use caution when tightening down the hardware. Fasteners should hold the glass in place. Think “snug” but not “tight”. The system must allow for expansion as the glass is heated. Overtightening fasteners, allowing the glass to “float” or move around, or allowing any metal on the door system to touch the glass will most always result in the glass breaking when the stove is heated.
• A basic rule with stove glass:
  • The channels the glass is mounted in should be clean, flat, and free of debris.
  • Gasket material provides an airtight seal where the glass and stove meet, this prevents the glass from making direct contact with any metal on the stove.
  • Many stoves are equipped with and “air wash” to help keep the glass clean. This is usually accomplished by removing a section of the glass gasket at the top or the bottom of the glass. If you see a section of gasketing “missing” this is probably why.
• When handling stove glass, wear gloves to prevent oils from your skin making contact with the glass. Gloves will also reduce the chance of any glass or gasket manufacturing debris from being absorbed into your skin.

Please open and inspect your glass to make sure that it has arrived intact. Damage Claims for broken glass from shipping MUST be made within 72 hrs of delivery, no exceptions. Glass breaking from after installation is NOT covered under warranty, this is due to improper installation. If you do not feel comfortable replacing your glass, please contact a licensed technician. For instructions on proper glass installation, please read the instructions provided in the instructions tab.

This Item Qualifies For Free Shipping!