Vogelzang Pellet Stove Air Pressure Vacuum Switch, 80549-AMP

Replacement Air Pressure Switch for many Vogelzang pellet stoves.

Instructions

Attach vacuum hose to white negative(-) port.

• 80549
• 80621

Need to upgrade or replace your wiring & connectors?

Shop for connectors, adapters, service tools, and more. Shop now

Compatible Models

To replace the pressure switch:

1. Unplug the unit
2. Remove service panel
3. Remove hose from switch
4. Remove mounting screws
5. Install new switch in the same position as the old switch
6. Connect vacuum hose to gray side of the switch
7. Connect the wires to either terminal

Check the Hose

Before purchasing a new switch or determining that your switch is broken, make sure the hose attached to the switch is not clogged. To check this, remove the hose from the switch and blow through it then reconnect the hose to the gray-side port.

Error Reporting

Flashing Draft Fan Setting - This indicates that the stove is in normal operation and that the vacuum sensor detects a loss of pressure either because the door is open or because there is a negative pressure in the room with respect to the exhaust. If the problem is not remedied and the unit is still in start-up mode you get a ERR-3. If this problem happens during run mode, you will get an ERR-2.