Assembly Instructions For
ComfortBilt Pellet Stove Overheat Sensor: CB-OVERHEATWIRE-AMP
1.) Unplug the power wire from the unit.
2.) Remove the side panel closest to the motherboard.
3.) Locate the sensor.
4.) Follow the sensor wires back to the circuit board and disconnect the sensor from the board.
5.) Using a pair of pliers, grab the end of the sensor and gently pull it from its housing/sleeve.
6.) Apply some high-temperature silicone to the metal cylinder end of the sensor.
7.) Slide the new sensor into the housing/sleeve.
8.) Plug the new sensor connector into the circuit board.
9.) Reinstall the side panel and plug in the unit.
For more detailed instructions click on the Videos tab above!