Assembly Instructions For
ComfortBilt Pellet Stove Proof of Fire Switch: FireSwitch-AMP
1.) Unplug the power cord from the unit.
2.) Remove the side panel closest to the exhaust flange.
3.) Locate the Proof of Fire switches on the exhaust pipe housing above the exhaust motor.
4.) Unplug both spade connectors from the active switch.
5.) Using a small flathead screwdriver remove both screws holding the switch plate in place.
6.) Install your new switch into the recess.
7.) Reinstall both screws.
8.) Plug both spade connectors onto the new switch (The orientation of the wires on this switch does not matter).
9.) Reinstall the side plate.
10.) Plug the power cord back into the unit.
Take a look at ComfortBilt's "Guide to Switches" if you have additional questions!
If you have additional questions, click on Videos for more information.