Harman Pellet Stove Burn Pot Clean Out Cover. This cover plate is located on the face of the burn pot. Removing this cover will give you access to the inside of the pot. This plate should be removed regularly for cleaning and needs to be removed when replacing the igniter. It is important to inspect this plate periodically to ensure it is seating correctly. If the plate dose not seal properly it can cause ignition issues and can negatively effect how your stove burns!
1.) Make sure the unit is shut down and the stove is cool.
2.) Open the main load door and ash door.
3.) Remove the ash pan (This will give easier access to the cover on most stoves).
4.) Locate the two bolts and loosen them until the cover plate is free (If the boltsare stuck in placespray a small amount of penetrating oil on them and let it sit. A pair of pliers or a socket should be used to loosen the bolts: (*Special care should be taken to avoid breaking/stripping the bolts*).
5.) After loosening the bolts the cover plate can be removed (If you are replacing the bolts they can be removed at this time as well).
6.) Position the new cover plate in place and tighten the screws. Do not over-tighten! (If you are replacing the bolts at this time you should thread both bolts into the holes on the bottom of the burn pot first, then position the cover plate in place and tighten each bolt).
7.) Confirm that the plate is seated tightly against the burn pot and there are no gaps present.
Troubleshooting
-If your stove is not igniting or burning correctly the cover plate should be removed and the inside of the burn pot should be cleaned/vacuumed.
-It is also important to make sure that the cover plate is seated firmly against the bottom of the burn pot. Any gap or opening will allow air to be drawn in at the bottom of the burn pot. This can cause missed ignition and an inefficient burn.
-At times a gap between the cover plate and the bottom of the stove can be resolved by simply tightening the thumb bolts. If the plate is warped it should be replaced.
Warranty
Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers
make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please
be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.
Shipping Information
This Item Qualifies For Free Shipping With
Orders Over $99!
When Will My Order Ship?
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
Do You Offer Express Shipping?
Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
How Does Free Shipping Work?
Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawaii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
Harman Pellet Stove Burn Pot Clean Out Cover. This cover plate is located on the face of the burn pot. Removing this cover will give you access to the inside of the pot. This plate should be removed regularly for cleaning and needs to be removed when replacing the igniter. It is important to inspect this plate periodically to ensure it is seating correctly. If the plate dose not seal properly it can cause ignition issues and can negatively effect how your stove burns!
1.) Make sure the unit is shut down and the stove is cool.
2.) Open the main load door and ash door.
3.) Remove the ash pan (This will give easier access to the cover on most stoves).
4.) Locate the two bolts and loosen them until the cover plate is free (If the boltsare stuck in placespray a small amount of penetrating oil on them and let it sit. A pair of pliers or a socket should be used to loosen the bolts: (*Special care should be taken to avoid breaking/stripping the bolts*).
5.) After loosening the bolts the cover plate can be removed (If you are replacing the bolts they can be removed at this time as well).
6.) Position the new cover plate in place and tighten the screws. Do not over-tighten! (If you are replacing the bolts at this time you should thread both bolts into the holes on the bottom of the burn pot first, then position the cover plate in place and tighten each bolt).
7.) Confirm that the plate is seated tightly against the burn pot and there are no gaps present.
Troubleshooting
-If your stove is not igniting or burning correctly the cover plate should be removed and the inside of the burn pot should be cleaned/vacuumed.
-It is also important to make sure that the cover plate is seated firmly against the bottom of the burn pot. Any gap or opening will allow air to be drawn in at the bottom of the burn pot. This can cause missed ignition and an inefficient burn.
-At times a gap between the cover plate and the bottom of the stove can be resolved by simply tightening the thumb bolts. If the plate is warped it should be replaced.
Warranty
Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers
make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please
be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.
Shipping Info
This Item Qualifies For Free Shipping With
Orders Over $99!
When Will My Order Ship?
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
Do You Offer Express Shipping?
Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
How Does Free Shipping Work?
Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawaii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
