Harman Absolute 43-C Pellet Stove Repair and Replacement Parts

This 306 Watt igniter is compatible with all automatic ignition Harman stoves except the PC45 and the PB105, which use a pressurized ignition syste...

Harman Burn Pot & Tailpipe Gasket Part 1-00-07381 Replacement Burn Pot and Tailpipe Gasket for Harman Stoves. Compatible Stoves: Accentra Inser...

This 306 Watt igniter is compatible with all automatic ignition Harman stoves. Was formally a 15 Fin..works with all Harman models listed. View our...

This flame guide replacement part is compatible with the following Harman stoves: -Accentra Insert, XXV, P35i, P43, P68, HF60, 52i, P43, Absolute43...

Replacement Flame Guide for Harman Stoves. Measurements: 6-1/4" to 3-1/2" x 4-1/8. Replaces Old Harman part number 3-00-674069. The flame guide is...

A pressure switch is often referred to as a vacuum switch. This sensor is looking for airflow within the stove to close the circuit to the feed sy...

This version of the ESP is the correct part for any model made after 2008. This updated ESP has red wires, as opposed to the previous probes which ...

One Replacement 1/4" screw post with washer. These are the screws that attach the glass hopper lid to the hinges. If you can hear a "whistle" from ...

A pressure switch is often referred to as a vacuum switch. This sensor is looking for airflow within the stove to close the circuit to the feed sys...

This version of the ESP is the correct part for any model made after 2008. This updated ESP has red wires, as opposed to the previous probes which ...

Harman Burn Pot Gasket, 1-00-07381 (Burn Pot Gasket Only) The burn pot gasket goes between the burn pot and the body of the stove and prevents comb...

This bearing is part of the Harman feed system. It goes on the armature that turns the auger.

This Harman Pellet Stove Hopper Lid Gasket is compatible with all Harman stoves and inserts that have a glass hopper lid and the 60 Series HHT Boil...

Replacement Tailpipe Gasket for Harman Stoves. This is the gasket that seals the stove to the appliance collar (tailpipe) that connects to the vent...

This is a flat braided gasket that is 1/4" wide and 7.5' long with an adhesive backing. Harman uses this gasket to create an air seal between the d...

Ceramic plate overfire replacement gasket for Harman pellet stoves, inserts, and boilers that utilize a burn pot with primary air inlets that over ...

This is a flat braided gasket that is 1/4" wide and 15' long with an adhesive backing. Harman uses this gasket to create an air seal between the do...

Harman Pellet Stove Replacement Flue Tube / Heat Exchanger tube cleaning brush for Harman stoves. Fits Harman: Accentra Insert, Invincible Insert, ...

HARMAN WIRELESS ROOM SENSOR THERMOSTAT Fits Models:  Absolute43, Absolute63, Allure50, XXV-TC, and Accentra Insert 52i-TC Harman Wireless Room Se...

This is an outboard 4RPM Auger Feed Motor for the Harman Advance, Accentra & XXV pellet stoves with a direct drive feeder design. These motors ...

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please r...

This 5 Amp, 20mm control board fuse is located on the backside of your Harman Stove Circuit board. All units made after 2013, with controllers Revi...

Replacement UL Feeder Snout Gasket

This Touch Up Paint is a fast-drying, exact color match for the popular Majolica Brown color used for cast iron enamel finishes in the HHT Harman a...

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please ...

Harman Air Intake Gasket for pellet most models. This is used to seal the intake flapper to the air intake weldment.

Harman Room Sensor Probe Extension 14FT, 3-20-674101 This sensor can be used with Harman pellet stoves and inserts to lengthen the distance of the ...

Feeder air crossover tube kit for Harman pellet stove and inserts and Heatilator Eco Choice pellet boilers. Kit Includes: 8-1/2" of 9mm silicone t...

This is an outboard 4RPM Auger Feed Motor for the Harman Advance, Accentra & XXV pellet stoves with a direct drive feeder design. These motors ...

The Cast Pawl Door Handle is the assembly commonly found on all Harman P Series Stoves made roughly around 2013 and after and was sold as a retrofi...

Replacement pipe stub plate gasket for exhaust pipe stub and fresh air intake pipe stub for Invincible, Accentra, and P35i pellet inserts. Compatib...

This Harman Polished Chrome Knob replacement part is compatible with the following Harman stoves: Advance Stove Accentra Stove XXV P35i Absolute 43

Replacement 3" Flue Tailpipe for all freestanding Harman Pellet Stoves. This appliance collar connects to the venting adapter to connect the stove ...

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

Replacement 1/2 pillow block for Harman and Heatilator Eco Choice stoves.

This is the room sensing probe that is attached to the back or side of all Harman pellet stoves and inserts. Its purpose is to read the return air ...

This replacement part is compatible with the following Harman stoves: 52i, P35i Insert P43 Stove P61 Stove P61A Stove P68 Stove Advance Stove Accen...

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

**THE STOVE WILL REQUIRE AN UPDATE TO THE FIRMWARE AND A REPROGRAMMING PRIOR TO RUNNING THE STOVE, SEE INSTRUCTIONS.** 2020 Certified Burnpot Repla...

This retainer is used to secure the bearing of the auger shaft assembly to the feeder body weldment. Use on all Harman pellet burning stoves, inser...

Replacement Thermostat Extension for Harman Pellet Stoves. The wire leads from this jack plug into the PCB of the controller and acts as a strain r...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Replacement Harman Touch Pad for all Harman pellet stove with Touch Control feature. When replacing the touch pad you need to program the new one t...

Leg Leveling Kit is For the Following Harman Stoves: XXV & Accentra FS

Replacement Harman UL Feeder Pusher Arm. Fits many models. Check your manual for compatibility. Part Number: 1-10-677187W

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...