Skip to main content
Skip to main content
Product title:

Comfort Bilt Vacuum/POF Switch Lead Wire: CB-SWITCHWIRE

Product rating:
Product price:
Save 15%
$11.99
$10.19
Product SKU ! CB-SWITCHWIRE
Product MPN ! CB-SWITCHWIRE
Product availability: In Stock
Bullet point features
Buy Now Pay Later

Description

ComfortBilt Pellet Stove Vacuum/POF Switch Wire.  This is a replacement connecting wire that can be used to connect the Vacuum or Proof of Fire Switch to the control board.  It attaches from the 2-pin jumper at the Motherboard.    

 

 


 


Replacement For Part Number:

  • CB-SWITCHWIRE

Compatible Models

Technical Specs

Length (in) 39"
Width (in) .5"
Height (in) .25"
Wire Connector Notes One End has 2 Female Spades One End Has A 2 Pin Molex Connector
Wire Length 39"
Weight 0.50 oz

Instructions

Install Instructions For Comfort Bilt Vacuum/POF Switch Lead Wire: CB-SWITCHWIRE

Install Instructions:

1.) Unplug the unit.

2.) Remove the side or back panel to gain access to the switch. The location of this switch will vary from model to model. See page 4 of ComfortBilts: Guide to Switches! for detailed information on the switch location.

3.) Once you have the switch in view disconnect the two spade connectors (Pay close attention to where these connectors attach to the switch).

4.) Disconnect the vacuum hose from the switch.

5.) Using a small screwdriver remove the two screws holding the switch in place.

6.) Install the new switch and attach it to the stove using the screws previously removed.

7.) Reconnect the vacuum hose to the switch.

8.) Reattach the spade connectors to the switch (The wires must attach to the same prongs, as they were installed on the previous switch.)

9.) Reinstall the rear or side panel.

10.) Plug in the unit.

For more detailed information click on ComfortBilts: Guide to Switches! or Click on Videos in the above tab.

Troubleshooting

Helpful Tips:

-Proof of Fire Switch: If the stove is displaying the low temp alarm despite a large fire burning, it could be a faulty switch or an issue with the switch wire. The easiest way to test this is to switch the wires from the currently used switch to the backup switch that is pre-installed next to the active switch. (Move the wires from their current position to the 2 open tabs on the switch next to it.) 

-Vacuum Switch: When the switch is operating correctly, there will be a “V” symbol visible on the bottom of the main screen whenever the exhaust fan is running. If the “V” is not present it is possible that there is an issue with the switch or switch wires.

Click here to view ComfortBilt's "Guide to Switches"


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

ComfortBilt Pellet Stove Vacuum/POF Switch Wire.  This is a replacement connecting wire that can be used to connect the Vacuum or Proof of Fire Switch to the control board.  It attaches from the 2-pin jumper at the Motherboard.    

 

 


 


Replacement For Part Number:

  • CB-SWITCHWIRE

Technical Specs

Length (in) 39"
Width (in) .5"
Height (in) .25"
Wire Connector Notes One End has 2 Female Spades One End Has A 2 Pin Molex Connector
Wire Length 39"
Weight 0.50 oz

Instructions

Install Instructions For Comfort Bilt Vacuum/POF Switch Lead Wire: CB-SWITCHWIRE

Install Instructions:

1.) Unplug the unit.

2.) Remove the side or back panel to gain access to the switch. The location of this switch will vary from model to model. See page 4 of ComfortBilts: Guide to Switches! for detailed information on the switch location.

3.) Once you have the switch in view disconnect the two spade connectors (Pay close attention to where these connectors attach to the switch).

4.) Disconnect the vacuum hose from the switch.

5.) Using a small screwdriver remove the two screws holding the switch in place.

6.) Install the new switch and attach it to the stove using the screws previously removed.

7.) Reconnect the vacuum hose to the switch.

8.) Reattach the spade connectors to the switch (The wires must attach to the same prongs, as they were installed on the previous switch.)

9.) Reinstall the rear or side panel.

10.) Plug in the unit.

For more detailed information click on ComfortBilts: Guide to Switches! or Click on Videos in the above tab.

Troubleshooting

Helpful Tips:

-Proof of Fire Switch: If the stove is displaying the low temp alarm despite a large fire burning, it could be a faulty switch or an issue with the switch wire. The easiest way to test this is to switch the wires from the currently used switch to the backup switch that is pre-installed next to the active switch. (Move the wires from their current position to the 2 open tabs on the switch next to it.) 

-Vacuum Switch: When the switch is operating correctly, there will be a “V” symbol visible on the bottom of the main screen whenever the exhaust fan is running. If the “V” is not present it is possible that there is an issue with the switch or switch wires.

Click here to view ComfortBilt's "Guide to Switches"


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
DP
CB switch wire

Prompt delivery. The switch wire was the right part, it fixed the problem.

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
DP
CB switch wire

Prompt delivery. The switch wire was the right part, it fixed the problem.