Install Instructions For Heatilator Eco-Choice Combustion Blower: SRV7000-602
Instructional Documents
Instructional Notes
This is the OEM direct replacement exhaust blower that comes complete with motor and housing. Other parts from your existing blower will need to be reused, to include: the F120-10 low limit switch and the Mfg. tail pipe that connects to the venting. The housing can be removed and replaced by removing the 5 7/16" screws and nuts that are around the perimeter of the housing.
****CAUTION*****
The older HHT pellet stoves use 120V of current through all of the SWITCHES AND COMPONENTS in these stoves.
ALWAYS unplug your stove prior to any work within the mechanical cabinet.
PLEASE NOTE: ACCUTRON I, II, III AND IV CONTROL PANELS USED ON OLDER HHT MODELS DO NOT HAVE A SAFETY FUSE!!!!! IF YOU TOUCH THE BACKSIDE OF THE CONTROLLER WITH ANYTHING CONDUCTIVE AND YOU DIDN'T UNPLUG THE UNIT OR YOU ATTACHED WIRES IN THE WRONG LOCATION, THE CONTROLLER WILL SHORT OUT AND NEED TO BE REPLACED. THEY ARE EXPENSIVE AND ONLY AVAILABLE FOR SOME MODELS...YOU HAVE BEEN WARNED!!!!