Heatilator Eco Choice BA100 Pellet Furnace Repair & Replacement Parts

Cleanup the ashes from your stove is a breeze with the new AV15E ash vacuum from US Stove Company. With a 2.5 peak horse power motor and a 6.5 Gall...

This exhaust blower motor is extremely durable and is used on many Heatilator Eco Choice pellet stoves.  Some pellet stoves had an older version of...

This 306 Watt igniter is compatible with Heatilator Eco Choice BA100 pellet furnace that does not use a pressurized ignition system. This igniter w...

A pressure switch is often referred to as a vacuum switch. This sensor is looking for airflow within the stove to close the circuit to the feed sys...

Replacement blower mounting screw for Heatilator Eco Choice stoves. These studs are used to attach the combustion blower to the blower mount. Three...

This version of the ESP is the correct part for any model made after 2008. This updated ESP has red wires, as opposed to the previous probes which ...

This 5" combustion blower fan blade is a double-sided impeller that is used on Heatilator Eco Choice Pellet Stoves. Check out the compatible stoves...

This exhaust blower motor is extremely durable and is used on many Heatilator Eco Choice pellet stoves.  Some pellet stoves had an older version of...

Flame Guide For Heatilator Eco-Choice Pellet Stoves Part # 3-00-08534. The flame guide is considered a "sacrificial" part that is supposed to be re...

This 5" combustion blower fan blade is a double-sided impeller that is used on Heatilator Eco Choice Pellet Stoves. Check out the compatible stoves...

Ceramic plate overfire replacement gasket for Heatilator Eco Choice pellet boilers that utilize a burn pot with primary air inlets that over the fi...

Heatilator Eco Choice 5" Single Paddle Impeller The Heatilator Eco Choice Combustion/Exhaust blowers require an impeller to aid in keeping air blow...

This is a flat braided gasket that is 1/4" wide and 7.5' long with an adhesive backing. Heatilator Eco Choice uses this gasket to create an air sea...

This is a flat braided gasket that is 1/4" wide and 15' long with an adhesive backing. Heatilator Eco Choice uses this gasket to create an air seal...

Replacement Heatilator Eco Choice Black Exhaust Sensing Probe (ESP) for BA100.

Heatilator Eco Choice Replacement Hose For The Differential Pressure Sensor Switch

A pressure switch is often referred to as a vacuum switch. This sensor is looking for airflow within the stove to close the circuit to the feed sy...

Replacement fire brick for Heatilator Eco Choice BA100 and BIO-120 Pellet Furnaces. Brick measures 12" x 6" x 1-1/4", which is larger than your ave...

This bearing is part of the Heatilator Eco Choice feed system. It goes on the armature that turns the auger.

Flame Guide For Heatilator Eco-Choice Pellet Stoves Part # 3-00-08534. The flame guide is considered a "sacrificial" part that is supposed to be r...

Replacement Vacuum/Pressure Switch Bracket Only for many Heatilator pellet stoves and inserts.

Replacement 1/2" ID grommet for Heatilator Eco Choice pellet stoves. Used with part # 1-00-247406 - UL feeder / auger motor bracket. Sold per one.

Replacement burnpot ceramic insert for Heatilator Eco Choice pellet stoves.

Replacement UL short slide plate assembly for Heatilator Eco Choice pellet boilers and furnaces.

This is the metal heat exchanger baffle plate with firebrick that fits over the burner of the Harman PF100 and PF120 Pellet Furnaces. Also the same...

This knob and post set is compatible with all Heatilator pellet boilers, and furnaces that do not have a touchscreen controller. Every application ...

Control board for the Heatilator Eco Choice BA100 and BIO-120 Series Pellet Furnaces. Comes with the circuit board, knobs (3), shafts (3), and inst...

This version of the ESP is the correct part for any model made after 2008. This updated ESP has red wires, as opposed to the previous probes which ...

This is the air pressure monitoring fitting which is mounted inside of the hopper Heatilator Eco Choice BA100 Pellet Furnace. When the glue on this...

This burn pot cleanout cover with 2 wingscrews is located at the front of all Harman pellet stoves and pellet inserts that are equipped with automa...

This burn pot cleanout cover with 2 wingscrews is located at the front of all Heatilator Eco Choice Pellet Furnaces and Boilers. Loosening the scre...

This 306 Watt igniter is compatible with Heatilator Eco Choice BA100 Pellet Furnaces that use the fin style igniter. Replaces part numbers: 1-10-0...

Replacement 1/4-20 X 5/8 thumb screw / wingscrew for Heatilator Eco Choice pellet boilers and furnaces. This screw is used for holding the cleanout...

Replacement wall-mounted thermostat for Heatilator Eco Choice BA100 Pellet Furnaces. Wall Control The wall control acts like a thermostat, a thermi...

This is the gasket that seals the Ultra air intake assembly to the feeder body weldment, for Heatilator Eco Choice pellet boilers and furnaces.

Replacement auger motor fan blade for 6RPM Auger Feed Motor 3-20-09302. Fits Heatilator Eco Choice BH60, BH105, BA100. This fan blade is not necess...

This 6RPM clockwise (CW) auger feed motor is used on most Heatilator Eco Choice pellet furnaces and boilers. This motor comes with a cooling fan w...

This 6RPM clockwise (CW) auger feed motor is used on most Heatilator Eco Choice pellet furnaces and boilers. This motor comes with a cooling fan wh...

This 6RPM clockwise (CW) auger feed motor is used on many Heatilator Eco Choice pellet furnaces and boilers. This OEM Heatilator Eco Choice motor d...

This latch expands when latched down to hold the hopper lid closed while making an air-tight seal. Used on many Heatilator Eco Choice pellet furnac...

This updated burnpot weldment kit for the BA100 and BH105 pellet furnaces and boilers has been redesigned with stronger metal and expansion lines i...

This 5" combustion blower fan blade is a single-sided impeller used on the Heatilator Eco Choice BA100. If any of the petals (fins) are bent, your ...

Harman Auger Motor Mount Bracket with Grommet for use on UL feeder body weldments. Fits the following units: Heatilator Eco-Choice Pellet Stoves:...

This retainer is used to secure the bearing of the auger shaft assembly to the feeder body weldment. Use on many Heatilator Eco Choice pellet furna...

Replacement UL Feeder Cam Block for Heatilator Eco Choice Pellet Furnaces and Boilers.

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot for many Heatilator Eco Choice Pellet Furnaces and Boilers.

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot compatible with many Heatilator Eco Choice pellet furnaces ...

Replacement UL short slide plate assembly for Heatilator Eco Choice pellet boilers and furnaces.