Skip to main content
Skip to main content
Product title:

Heatilator Eco Choice BA100 & HB105 Burnpot Weldment Kit: 1-00-73560

Product rating:
Product price:
$599.99
Product SKU ! 1-00-73560 (HEA)
Product MPN ! 1-00-73560
Only 9 Left In Stock
Bullet point features

Frequently Bought Together

Total Price: $669.97

Description

This updated burnpot weldment kit for the BA100 and BH105 pellet furnaces and boilers has been redesigned with stronger metal and expansion lines in the steel to allow for proper heat expansion. Earlier models will have burnpots that can "bubble" on the fire surface just above the igniter.

When using on units with pressure ignition, an igniter bracket is not necessary.

When removing the old burnpot take special care not to break the ceramic insert. However, one is provided if needed.

New Ceramic gasket is VERY fragile. BE CAREFUL while handling.

Kit Contents

  • 1 x Burn Pot Assy (1-10-7356)
  • 1 x  Igniter Bracket (2-00-24778)
  • 1 x Ceramic Insert (3-20-0523)
  • 1 x Ceramic Gasket (3-44-72411)
  • 2 x Rod Couplings (3-31-08741)

 


Replacement For Part Numbers:

  • 1-00-73560
  • 1-10-7340
  • 1-10-73403
  • 1-10-73546A

UPC: 652174712656

Compatible Models

    Heatilator Eco Choice

  • BA100
  • BH105

Technical Specs

Instructions

Install Instructions For Heatilator Eco Choice BA100 & HB105 Burnpot Weldment Kit: 1-00-73560

To replace the burnpot:

  1. Unplug your stove
  2. The igniter is inside if the burnpot. From the rear of the stove, find the yellow and light blue colored wires that are coiled up and secured to the wiring harness. cut the zip ties that hold this collection of wire together. when the burn pot is removed, this is the length of wire that will pass through the stove body as the burn pot is pulled out. If the wires are not free to travel, the burnpot will only move about 4 inches.
  3. Locate and remove the 4 1/2" nuts that secure the burnpot to the feeder weldment threaded rods. You may need a universal joint at the end of your socket wrench to make the connection at the top nuts.
  4. Pull the burnpot assembly forward until the yellow and light blue wires are visible, then disconnect the igniter wires. Now the burn pot is free to come out of the stove
  5. Remove the two 5/16" screws that hold the igniter in to the burnpot and then remove the igniter assembly
  6. If you are replacing your igniter, do this now while the burnpot is free from the stove.
  7. Make sure to run the wires for the igniter through the right-side opening at the rear of the burn pot
  8. Replace your burnpot gasket, make sure your yellow and light blue wires are passing through the hole and through the center of the gasket.
  9. Connect your igniter wires and pull the yellow and light blue wires from the back of the stove so that the disconnects pass backward through the opening. Try to take out as much slack in the igniter wires as possible so that they aren't pinch by the burnpot when it is fit into place. Note: for this part of the job, having another person around to pull the wires as you fit the burnpot in stove is key.
  10. Replace your new burn pot over the threaded rods and tighten down all 4 1/2" hex nuts. You will feel the new gasket compress as you tighten the burnpot down, this is normal. DO NOT PINCH THE IGNITER WIRES WHEN DOING THIS PART
  11. Replace the clean out cover and secure your wires in the rear of the stove.


Troubleshooting

Many folks will replace the burnpot if their stove is having problems igniting. In general, slow or missed ignitions are a problem to do with an air leak within the stove and not the burnpot itself. Obviously, if your burn pot has a big hole worn in it or there is a bubble on the burn surface where the metal has changed shape, those are examples that would require a new burnpot.

If you are having delayed ignitions and can verify that they igniter is getting hot;

  1. Tighten the four 1/2" nuts that secure the burnpot.
  2. Replace your door gasket and the ash pan gasket if you have separate doors
  3. 3. Look at your door handle to make sure the comp

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

This updated burnpot weldment kit for the BA100 and BH105 pellet furnaces and boilers has been redesigned with stronger metal and expansion lines in the steel to allow for proper heat expansion. Earlier models will have burnpots that can "bubble" on the fire surface just above the igniter.

When using on units with pressure ignition, an igniter bracket is not necessary.

When removing the old burnpot take special care not to break the ceramic insert. However, one is provided if needed.

New Ceramic gasket is VERY fragile. BE CAREFUL while handling.

Kit Contents

  • 1 x Burn Pot Assy (1-10-7356)
  • 1 x  Igniter Bracket (2-00-24778)
  • 1 x Ceramic Insert (3-20-0523)
  • 1 x Ceramic Gasket (3-44-72411)
  • 2 x Rod Couplings (3-31-08741)

 


Replacement For Part Numbers:

  • 1-00-73560
  • 1-10-7340
  • 1-10-73403
  • 1-10-73546A

UPC: 652174712656

Instructions

Install Instructions For Heatilator Eco Choice BA100 & HB105 Burnpot Weldment Kit: 1-00-73560

To replace the burnpot:

  1. Unplug your stove
  2. The igniter is inside if the burnpot. From the rear of the stove, find the yellow and light blue colored wires that are coiled up and secured to the wiring harness. cut the zip ties that hold this collection of wire together. when the burn pot is removed, this is the length of wire that will pass through the stove body as the burn pot is pulled out. If the wires are not free to travel, the burnpot will only move about 4 inches.
  3. Locate and remove the 4 1/2" nuts that secure the burnpot to the feeder weldment threaded rods. You may need a universal joint at the end of your socket wrench to make the connection at the top nuts.
  4. Pull the burnpot assembly forward until the yellow and light blue wires are visible, then disconnect the igniter wires. Now the burn pot is free to come out of the stove
  5. Remove the two 5/16" screws that hold the igniter in to the burnpot and then remove the igniter assembly
  6. If you are replacing your igniter, do this now while the burnpot is free from the stove.
  7. Make sure to run the wires for the igniter through the right-side opening at the rear of the burn pot
  8. Replace your burnpot gasket, make sure your yellow and light blue wires are passing through the hole and through the center of the gasket.
  9. Connect your igniter wires and pull the yellow and light blue wires from the back of the stove so that the disconnects pass backward through the opening. Try to take out as much slack in the igniter wires as possible so that they aren't pinch by the burnpot when it is fit into place. Note: for this part of the job, having another person around to pull the wires as you fit the burnpot in stove is key.
  10. Replace your new burn pot over the threaded rods and tighten down all 4 1/2" hex nuts. You will feel the new gasket compress as you tighten the burnpot down, this is normal. DO NOT PINCH THE IGNITER WIRES WHEN DOING THIS PART
  11. Replace the clean out cover and secure your wires in the rear of the stove.


Troubleshooting

Many folks will replace the burnpot if their stove is having problems igniting. In general, slow or missed ignitions are a problem to do with an air leak within the stove and not the burnpot itself. Obviously, if your burn pot has a big hole worn in it or there is a bubble on the burn surface where the metal has changed shape, those are examples that would require a new burnpot.

If you are having delayed ignitions and can verify that they igniter is getting hot;

  1. Tighten the four 1/2" nuts that secure the burnpot.
  2. Replace your door gasket and the ash pan gasket if you have separate doors
  3. 3. Look at your door handle to make sure the comp

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Mike L.
Nice looking product.

Very well built.

A
Anonymous
Stain Steel Burnpot

I put the Burnpot in the stove but i did not
fire up the stove yet.

I'LL LET YOU KNOW.

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Mike L.
Nice looking product.

Very well built.

A
Anonymous
Stain Steel Burnpot

I put the Burnpot in the stove but i did not
fire up the stove yet.

I'LL LET YOU KNOW.

Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid