Napoleon NPS40 Pellet Stove Repair and Replacement Parts

Ignitor & Housing Assembly for Napoleon Pellet Stoves We sell the best replacement ignitor and housing assembly for Napoleon pellet stoves. O...

Napoleon Door & Glass Gasket GDS5C GDS5C Glass Gasket by Napoleon Pellet Stoves for models: NPS40, NPI40 NPS45, NPI45, Part #: W562-0022. Get S...

Napoleon Igniter Gasket For All Models Part Number: W290-0119

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

Replacement Enviro 115v Auger Timer Control designed for 3 Second Intervals for Select Pellet Stoves, See Compatible.   

6" Round Napoleon Motor Mount Gasket Motor Mount Gasket by Napoleon Pellet Stoves. 4 3⁄8" ID, 5 7⁄8" OD Part Number: W290-0120

Replacement Enviro Pellet Stove EF2/3 DIAL-A-FIRE 115V. This is the component that controls the speed of the auger motor that delivers the fuel to ...

Auger Motor for Napoleon for models NPS40, NPI40, NPS45, NPI45, TPS & TPI35.REPLACES PART#W435-0009 Our Napoleon auger motor comes fully assemb...

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

Combustion/Exhaust Blower Mounting Gasket by Pellet Stoves for models: NPS40, NPI40, NPS45, NPI45, TPS & TPI35.Part Number: W290-0111

Ignition Switch (120F) for Napoleon Pellet Stoves models: NPS40 and NPI40 # W660-0054

Napoleon Ignitor & Housing Assembly We sell the best replacement ignitor and housing assembly for Napoleon pellet stoves. Our Napoleon Pellet ...

Low-Limit (140F) Exhaust Switch W660-0052 Napoleon Pellet Stove for models: NPS40 and NPI40

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Convection Blower Mounting Gasket Part Number: W290-0113

This Exhaust gasket creates an airtight seal for your Napoleon and Timberwolf Combustion Blower. Fits Several models. Part Number: W290-0122

Combustion Blower for all Napoleon NPS40-45 and NIP40-45 Series Pellet Stoves and Inserts

High-Limit Switch (200F) for Napoleon models: NPS40, NPI40, NPS45, NPI45, TPS & TPI35 # W660-0055

Replacement auger bushing Fits the following models: NPS45/NPI45, NPS40/NPI40,TPS35 &TPI35

Cleanup the ashes from your stove is a breeze with the new AV15E ash vacuum from US Stove Company. With a 2.5 peak horse power motor and a 6.5 Gall...

This is a replacement wiring adapter with a Male Crimped Terminal Spade to a Female Spade Terminal. Can be used on blowers, auger motors, and more....

Auger Motor for Napoleon for models NPS40, NPI40, NPS45, NPI45, TPS & TPI35.REPLACES PART#W435-0009 Our Napoleon auger motor comes fully assemb...

Wire connector with 2 male spades and a Molex style connector.

Replacement Napoleon Power Control Relay for Napoleon Pellet Stoves. 900 Second Timer (15 Minutes) Please note that in some manuals for the Napole...

Vacuum Switch for Napoleon Pellet Stove NPI40/45, NPS40/45, TPS & TPI35 Part Number: W660-0056 The vacuum switch is the stoves way of knowing i...

Make routine maintenance a breeze with this complete pellet stove service kit. This kit includes everything you need to clean both your stove and ...

Thermostatic Sensor Control for Napoleon Woodstove Blower model GZ552. This part also fits the Napoleon 1101 Woodstoves 120/125 Degree

4-in-1 Multi-Purpose Wire Service Tool. Cutter, Stripper, Crimper, & Gripper. 7in total overall length.

Napoleon & Timberwolf Burnpot Gasket Only For Models With The Round Burnpot Part Number: W290-0126

Napoleon Auger Auger Collar For The NPS & NPI Models, #W500-0501 for the auger shaft.

This is a replacement three pronged 6 foot power cord for Napoleon and Timberwolf Pellet Stoves. Fits many models.

Power Control Relay by Napoleon Pellet Stoves for models: NPS40 and NPI40. Relay and the Power Control Relay part numbers were transposed. Replace ...

Auger Motor for Napoleon for models NPS40, NPI40, NPS45, NPI45, TPS & TPI35.REPLACES PART#W435-0009 Our Napoleon auger motor comes fully assemb...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

Exhaust Over-ride Switch (160F) for NPS40 and NPI40 Napoleon Pellet Stove # W660-0053

Pellet Feed Switch Assembly W660-0063 for Napoleon pellet stove models: NPS40 and NPI40

Replacement Convection blower for Napoleon models NPS40, NPS45 & TPS351600 RPM

Combustion / Exhaust Blower by Napoleon Pellet Stoves for models: NPS40, NPI40, NPS45, NPI45, TPS & TPI35

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Replacement cast iron burnpot for certain models. Please check your owners manual for compatiblity this does not fit certain serial numbers.

Replacement Napoleon Power Control Relay for Napoleon Pellet Stoves. 900 Second Timer (15 Minutes) Relay and the Power Control Relay part numbers ...

Low-Limit (140F) Exhaust Switch W660-0052 Napoleon Pellet Stove for models: NPS40 and NPI40

Power Control Relay by Napoleon Pellet Stoves for models: NPS40 and NPI40. Relay and the Power Control Relay part numbers were transposed. Replace ...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

This is a replacement Auger Shaft Napoleon and Timberwolf Pellet Stoves. Fits many models.  

Replacement Hopper Interlock Switch for Timberwolf TPS and TPI 35 pellet stoves