Pit Boss 7 Series Vertical Pellet Smoker Grill Repair and Replacement Parts

If your igniter is on its last leg, we can help! The Pit Boss Igniter is a replacement igniter for most pit boss pellet grills. It is 200 Watts, 3 ...

Replacement auger motor for pit boss pellet grills includes the shear pin. A pellet grill auger drive motor keeps the fuel moving into the firepot...

Replacement auger motor shaft bolt fits all Pit Boss grills. Also Included is the nut part number 74073.

Replacement convection fan motor for pit boss pellet grills.

Replacement black meat probe compatible with all LG and PB Digital Control Centers featuring a programmable meat probe, with a 48" long wire.  Jack...

This Molex connection kit is rated for usage with 18 to 24 AWG wire. The connector housing requires the use of male Molex metal pins and female Mol...

This trapezoid face control board is used on the 5, and 7 Series Pit Boss vertical smokers. Comes with the power cord and wiring harness soldered i...

Replacement Set of 1 Screw & 1 Nut used to Mount the RTD bracket to the barrel compatible with all Pit Boss Pellet Grills. This hardware can al...

Self-curing our best BBQ smoker adhesive Food safe RTV 650 F BBQ grill smoker sealer Hi Temp Silicon adhesive.650F max (intermittent temp) rtv sili...

Pit Boss RTD Temperature Probe for all Vertical Smokers and used with the CAT-02-PS5 Controller

Replacement igniter/hot rod for most pit boss pellet grills. 200 WATTS 3 1/2″ LONG 3/8″ WIDE

Replacement Screw used to mount the RTD bracket, hopper access panel, hopper screen, and more, compatible with most Pit Boss pellet grills. Sold in...

Replacement cooking grid support bracket for the Pit Boss 3, 5 and 7 Series Vertical Smokers. Sold individually. Length: 9 1/2"

This trapezoid face control board is used on 5, and 7 Series Pit Boss vertical smokers. Comes with the power cord and wiring harness soldered into ...

This is the latch system for keeping the door on the vertical smoker closed on the Pit Boss vertical smokers. It mounts on to the cabinet. It's use...

Replacement Power Cord Strain Relief for all Pellet Grills.

This is the water pan for the bottom of the Pit Boss Series 5 and 7 Vertical Smokers

Replacement auger motor for pit boss pellet grills includes the shear pin. A pellet grill auger drive motor keeps the fuel moving into the firepot...

This is the feed auger for the Pit Boss Series 5 and 7 vertical smokers PBV57P1-26

This is the grease tray located at the bottom of all Pit Boss Vertical Smokers.

This is the chimney for Pit Boss Vertical SmokersPBVXP1

This cooking grid is for the inside of the Pit Boss 5 and 7 Series Vertical Smokers. Each grid measures 21 3/4" x 14 1/4" and is held in place by t...

Replacement fan blade for the auger motor. If you need the motor it is part 70102

This is the handle on the door for the Pit boss 3, 5, and 7 Series Vertical Smokers PBV2357- 07 Part # 32498

Hardware for the assembly of a Pit Boss Vertical Smoker. The pack is for the Series 3, 5, and 7. Also known as part # PBVER70002000 Hardware Pack -...

Theis the knob that attaches to the clean outdoor, used for changing pwellet flavors on your Pit Boss Vertical Smoker. Used on the 3, 5, and the 7 ...

Replacement convection fan motor for pit boss pellet stoves.

This Pit Boss flame tamer sits at the base of the cabinet and acts as a baffle to disperse the flames and heat for the 3, 5, and 7 Series Vertical ...

Replacement propeller fan blade for the induction air fan motor.

Know exactly when to finish your cooks with the Pit Boss Pocket Thermometer. Its slim design and magnetic mount makes it easy to store, while the d...

This is the bracket that holds the feed motor in place for the Pit Boss Vertical Smoker 3, 5, and 7 Series. It attaches to the back of the auger bo...

This is one of two locking caster wheels on Pit Boss Vertical Smokers. Each smoker has two locking casters and two non-locking casters.

This is the door hinge kit for all Pit Boss Vertical Smokers. Sold individually.

This is the inner housing for mounting the feed system and the burn pot under the smoker cabinet of the Pit Bos Vertical 5 and 7 Series Smokers.

This is the burn pot for all 3, 5, and 7 Series Pit Boss Vertical Smokers

Replacement Combustion Fan Housing for Pit Boss Pellet Vertical Smokers Series 3, 5, and 7.

This is one of two non-locking caster wheels on Pit Boss Vertical Smokers. Each smoker has two locking casters and two non-locking casters.

This is the door hinge (Cabinet Body Side)(QTY 1) for all Pit Boss Vertical Smokers. Each smoker has two (2) cabinet side hinges that receive the d...

Pit Boss Digital Wireless Thermometer is the smart choice for remotely monitoring your grill or smoker. The days of babysitting temperatures are ov...

This is the handle on the back of the cabinet for the Pit Boss 7 Series Vertical Smoker

This is the feed auger for the Pit Boss Series 5 and 7 vertical smokers PBV57P1-26

This is the door assembly for the Pit Boss 7 Series Copperhead Vertical Smoker. Includes the door frame, glass & gasket.

Bundle up and save by getting the combo kit of chimney smoke stack and cap for Pit Boss Vertical Smokers. 60268 COMBO WITH STACK PVB357P1-04  

Replacement black meat probe compatible with all LG and PB Digital Control Centers featuring a programmable meat probe, with a 48" long wire. 

Pit Boss RTD Temperature Probe for all Vertical Smokers and used with the CAT-02-PS5 Controller

This is the burn pot for all 3, 5, and 7 Series Pit Boss Vertical Smokers

This is a 25" Extention for the RTD probes, ZG-RTD-2. This may be compatible with other RTD probes that have the male quick connecting Molex connec...

This hopper glass is mounted inside the fuel hopper for a visual reference of the fuel level. Includes glass, gasket and mount backing.