Pit Boss Igniter Hot Rod 200 Watts, 70112-AMP

$29.99

A $20.00 Savings vs the OEM

SKU 70112-AMP
MPN 70112
  • After Market Part
  • Try the OEM version of this part
  • Compatible Replacement For Part 70112
  • Ships FREE with orders over $99
  • 30-Day hassle free return policy
  • Express Shipping available
  • 90 Day Warranty On All Items
  • Learn More...

Description

Replacement igniter/hot rod for most pit boss grills. Fits most pellet grills.

  • 200 WATTS
  • 3 1/2″ LONG
  • 3/8″ WIDE

Replacement For Part Number:
  • 70112

Compatible Models

Helpful Tips

It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

Troubleshooting Igniters:

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Warranty

Unfortunately sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 1PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Is Expedited Shipping Available?

We offer both overnight and two day air shipping services for all orders placed within the Continental United States. For information on shipping cut-off times, go to our shipping page.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

If you wish to calculate shipping for an item which does not qualify for free shipping, or if you would like the cost to expedite your order, please do the following. Add the item you want to order to your cart and click here to be taken to the cart page where you can enter your country, state / province, and zip code for an estimate.

Shipping Time Estimations

For information on shipping time estimations, see either the Shipping Information & Transit Times on the cart page, or go to our shipping page.

Read More About Our Shipping Information

Please Note: Due to the COVID-19 emergency, USPS and UPS will not guarantee delivery times on next-day and second-day delivery services. Unfortunately, we will not be able to provide a refund for packages shipped this way which are late. Everyone is trying their best under these circumstances. Thank you for your understanding.

Customer Reviews

Based on 36 reviews Write a review

QUESTIONS & ANSWERS

Ask a Question
  • Why do I keep burning out hot rods I replaced control module thinking it was staying lit. 880 pit boss

    Are you running the grill on the smoke setting? The smoke setting is for starting the grill.

  • I have PB340 when we get ready to use it, turn on the switch on to let it warm up it says err after 10 mins.

    Verify that your igniter is getting hot, no > replace igniter. Verify that your auger is feeding, No> clear blockages or replace the auger motor. If the feed and the igniter both work you should have a fire, no > replace the controller

  • Will this work on a pb700r1 rancher

    Yes

  • Will this work on a Pit Boss 820?

    Yes.

  • Do you sell the hot rod for a ZGrill? Model number ZPG-7002B

    Z Grills and Pit Boss use many of the same parts. The igniter is one of them.

  • Will this work on a pit boss Austin xl grill?

    Yes, according to the replacement parts list for the Pit Boss Austin 1000XL ignitor part number 70112 is correct.

  • Pls confirm fits pitboss PB1000XLW1 thx

    All of the igniters are the same length.

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods