Install Instructions For USSC Pellet Stove T-Disc Gasket (Bay Front 5660): 88175
1.) Please make sure your stove is completely cooled before attempting to do any maintenance.
2.) Disconnect the power from your stove.
3.) Using a #2 Phillips screwdriver, remove the screws securing the side panel to the stove.
4.) Remove the side panel by lifting it up and away from the stove.
5.) Locate the Therm-O-Disc on the exhaust blower.
6.) Disconnect the wire leads located on either side of the Therm-O-Disc.
7.) Remove the two screws securing the thermal disc to the exhaust blower, then remove the switch and gasket.
8.) Position the new gasket in place, then place the new Therm-O-Disc in position.
9.) Reinstall the previously removed screws to secure the switch.
10.) Reconnect the wires on either side of the Therm-O-Disc.
11.) Reinstall the side panel.
12.) Reconnect power to your stove and run a test burn
Click here to view a brief video going over Therm-O-Disc removal and installation!