Skip to main content
Skip to main content
Product title:

US Stove Exhaust Blower Assembly: 80602-AMP

Product rating:
Product price:
$179.99

A $170.00 Savings over the OEM

Product SKU ! 80602-AMP
Product MPN ! 80602
Product availability: In Stock
Bullet point features

Frequently Bought Together

Total Price: $199.98

Description

USSC Pellet Stove Exhaust Blower Assembly.  The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air into the stove.  It is important that the blower functions properly.  If the blower is not running as it should, smoke/flue gas may enter the room.  You may also notice a lazy flame and a poor burn as a result of inadequate combustion air being delivered to the fire.


Replacement For Part Number:

  • 80602

View Compatible Models

UPC: 012685806020

Compatible Models

    US Stove Company

  • 5501S
  • 5560
  • 5660

Technical Specs

Volts 115
Cycles 60Hz
Amps 1.66
RPM 3000

Instructions

Install Instructions For US Stove Exhaust Blower Assembly: 80602-AMP

Blower Assembly Replacement:


  1. Unplug the unit.
  2. Open the service panel on the side of the unit.
  3. Locate and remove the high-limit thermodisc from the blower housing.
  4. Remove the two wire leads running from the wiring harness to the blower motor.
  5. Next, remove the bolts holding the blower housing to the stove (If the venting is connected to the stub on the back of the blower housing it will need to be disconnected).
  6. Remove the blower (The gasket between the blower housing and stove should be replaced at this time).
  7. Position the new blower assembly and gasket in place and reinstall the previously removed bolts.
  8. Reconnect the venting if it was disconnected (Remember to apply high-temp silicone at the connection point).
  9. Reinstall the high-limit thermodisc.
  10. Connect the previously removed wires to the new blower motor.
  11. Plug in the unit and test the motor.

Troubleshooting

-The exhaust blower is responsible for removing smoke from the unit and pulling combustion air into the stove. If you notice a lazy flame when your stove is burning or smell smoke you should shut down the stove.

-Carefully inspect all gaskets, clean the stove/venting, and inspect the area around the combustion blower.

-If all gaskets are sealing properly and the stove/venting is clean, the combustion blower may need to be replaced.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

  • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
  • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE

Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

USSC Pellet Stove Exhaust Blower Assembly.  The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air into the stove.  It is important that the blower functions properly.  If the blower is not running as it should, smoke/flue gas may enter the room.  You may also notice a lazy flame and a poor burn as a result of inadequate combustion air being delivered to the fire.


Replacement For Part Number:

  • 80602

View Compatible Models

UPC: 012685806020

Technical Specs

Volts 115
Cycles 60Hz
Amps 1.66
RPM 3000

Instructions

Install Instructions For US Stove Exhaust Blower Assembly: 80602-AMP

Blower Assembly Replacement:


  1. Unplug the unit.
  2. Open the service panel on the side of the unit.
  3. Locate and remove the high-limit thermodisc from the blower housing.
  4. Remove the two wire leads running from the wiring harness to the blower motor.
  5. Next, remove the bolts holding the blower housing to the stove (If the venting is connected to the stub on the back of the blower housing it will need to be disconnected).
  6. Remove the blower (The gasket between the blower housing and stove should be replaced at this time).
  7. Position the new blower assembly and gasket in place and reinstall the previously removed bolts.
  8. Reconnect the venting if it was disconnected (Remember to apply high-temp silicone at the connection point).
  9. Reinstall the high-limit thermodisc.
  10. Connect the previously removed wires to the new blower motor.
  11. Plug in the unit and test the motor.

Troubleshooting

-The exhaust blower is responsible for removing smoke from the unit and pulling combustion air into the stove. If you notice a lazy flame when your stove is burning or smell smoke you should shut down the stove.

-Carefully inspect all gaskets, clean the stove/venting, and inspect the area around the combustion blower.

-If all gaskets are sealing properly and the stove/venting is clean, the combustion blower may need to be replaced.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

  • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
  • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE

Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 44 reviews
95%
(42)
5%
(2)
0%
(0)
0%
(0)
0%
(0)
P
Paul s.
Great to deal with

Parts I order are always perfect

V
Vicki s.
Stove parts

It's always sketchy when you order on line. Not this time. Both pieces were exactly what we needed. Stove runs like a new one. Super fast shipping.

C
Charles E.D.
Exhaust blower

Just used old end flange worked great

T
Tim H.
fit perfect

Very fast shipping and the item fit perfect 5 star rating

J
John M.

My US stove exhaust blower assembly was a perfect fit.
The same goes for the many parts I have bought over the years for my two different pellet stoves.

123

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form
Ask a Question

  • When will this product be back in stock, my motor is getting bearing shaft wear. Thanks ,Evan R.

    Enter your email on the product page and we can notify you when the part is available.

Customer Reviews

Based on 44 reviews
95%
(42)
5%
(2)
0%
(0)
0%
(0)
0%
(0)
P
Paul s.
Great to deal with

Parts I order are always perfect

V
Vicki s.
Stove parts

It's always sketchy when you order on line. Not this time. Both pieces were exactly what we needed. Stove runs like a new one. Super fast shipping.

C
Charles E.D.
Exhaust blower

Just used old end flange worked great

T
Tim H.
fit perfect

Very fast shipping and the item fit perfect 5 star rating

J
John M.

My US stove exhaust blower assembly was a perfect fit.
The same goes for the many parts I have bought over the years for my two different pellet stoves.

123
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid