Skip to main content
Product title:

USSC Pellet Stove Igniter (Cartridge/Module) 250W (4.65"): 80619

USSC Pellet Stove Igniter (Cartridge/Module) 250W (4.65"): 80619 USSC Pellet Stove Igniter (Cartridge/Module) 250W (4.65"): 80619 USSC Pellet Stove Igniter (Cartridge/Module) 250W (4.65"): 80619 USSC Pellet Stove Igniter (Cartridge/Module) 250W (4.65"): 80619 USSC Pellet Stove Igniter (Cartridge/Module) 250W (4.65"): 80619
USSC Pellet Stove Igniter (Cartridge/Module) 250W (4.65"): 80619

Have a Question? Contact Us 24/7 to Ask a Specialist

Product rating:
Product price:
$79.99
Product SKU ! 80619
Product MPN ! 80619
Product availability: In Stock
Bullet point features

Pay over time with Affirm.

Have a Question? Contact Us 24/7 to Ask a Specialist

You may also want to consider...
USSC (Pellet Stove) Igniter Flange Gasket: 88118

$6.99

View
You are viewingOEM Consider insteadAftermarket (AMP)Saves $30.00 vs the OEM
USSC Pellet Stove Igniter (Cartridge/Module) 250W (4.65"): 80619Related Product Title USSC Pellet Stove Igniter (Cartridge/Module) 250W (4.65"): 80619-AMP
$79.99In stockRelated Product Price: $49.99 In stock
Related Product Ratings:

Frequently Bought Together

Parts other customers added to their cart along with this one. Untick any you do not need, then add the rest together.

Total for 5 items $95.95

Description

USSC Pellet Stove Igniter (Cartridge/Module) 250W (4.65"): 80619. This igniter superheats the air entering the burn pot to ignite the pellets. If your stove experiences slow starts, missed ignition, or the igniter fails to reach temperature, it may need to be replaced!

Note: This igniter measures 4.65" in total length (metal portion). It was replaced by the newer igniter 80481, which measures 4" in total length. If you are upgrading from the 4.65" to the 4" igniter, you will need a new igniter tube, part number 86633.

 

UPC: 012685806198

Replacement For Part Numbers:

  • 80619
  • PP3530

Compatible Models

These are all of the confirmed compatible units for this product. This product may fit others, but these are the only ones we suggest ordering it for at this time.

Golden Eagle

US Stove Company

King

Technical Specs

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

Length (in) 4 ½"
Width (in) ⅜"
Height (in) ⅜"
Outer Diameter (in) ⅜"
Voltage 120
Power type AC
Wattage 250
Frequency (Hz) 60
Wire Connectors Two Female Spades
Weight 1.5 oz

Wiring and Connectors

Wire, terminals and connectors for the job, in case yours are worn or the ones you have do not reach.

Instructions

Install Instructions For USSC Pellet Stove Igniter (Cartridge/Module) 250W (4.65"): 80619

Instructional Videos

Instructional Notes

1.) Make sure your stove is completely cool, and then remove the power cord from the back of the unit.

2.) Remove the needed panels to gain access to the area of the stove where the igniter is mounted (This will vary from unit to unit).

3.) Unplug the two wire leads coming from the auger motor.

4.) Using pliers, remove the retainer pin that locks the auger motor to the auger shaft and remove the motor (The auger motor should drop down free from the auger shaft once the pin is removed. The auger may not need to be removed on all models).

5.) Disconnect the two wire leads coming from the igniter that are fed from the wiring harness.

6.) Remove the two bolts holding the igniter module in place.

7.) Once removed, use an Allen wrench to loosen the screw on the back of the module (This will allow the igniter to be removed from the housing).

8.) Insert the new igniter into the housing and tighten the Allen screw (Leave approximately 1/4 inch from the end of the housing to the end of the igniter).

9.) Reposition the igniter housing and install the previously removed bolts.

10:) Connect the two wires from the igniter back to the igniter wires being fed from the harness.

11.) Line up the auger with the auger shaft and insert the retaining clip to lock the auger motor in position.

12.) Reconnect the wire leads to the wiring for the auger.

13.) Reconnect any previously removed panels.

14.) Connect the power cord.

15.) Turn on the stove to run a test burn.

Troubleshooting

It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

Troubleshooting Igniters

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Customers Also Bought

Parts that customers who bought this one also ordered, the most popular first.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for special parts may take up to 4 weeks for processing, and customers are responsible for return shipping charges.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
Do You Offer Express Shipping?
Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
How Does Free Shipping Work?
Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawaii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
Learn More About Our Shipping Information

Questions & Answers

If your question does not concern this part, contact us directly or read our FAQs.

No one has asked about this part yet. Ask us anything specific to it - the wattage, which style or model year it suits, what part numbers it replaces - and we will answer it ourselves.

Every question is read by our team before it appears here, so it will not show up right away - we will email you the answer.

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
L
Laura B.
Perfect fit for my stove!

The ignitor replacement fit my pellet stove perfectly and fixed that problem. However, found out we also needed to replace the auger motor so that's on order! Appreciate the quick turn around in getting parts shipped and the quality too. Thank you

V
Valerie M.
Quick and easy, as it should be!

Our King Stove wouldn't light. We reviewed our manual and reviewed the igniter. Perfect! Order it on line and received very quickly. Just in time for the cold night thus far! Thank you!

K
KENNETH H.
GREAT REPLACEMENT PARTS

All parts worked great. I got some bad parts from another seller. But the the replacement parts i got from STOVE & GRILL PARTS FOR LESS WERE EXACT REPLACEMENT PARTS AND VERY GOOD QUALITY
thanks kenneth hayslip

K
Kristen P.

US Stove Igniter 250W (4.65"): 80619

L
LINDA D.

USSC Ignitor for models 5500M, 5500XLT,5510, 5600, 5700 4840 5520, #80619

12

Still have a question?

Call or email us and we will help you find the right part.

Contact us 1-508-392-9831
Mon–Sat 9AM–5PM · Sun 10AM–3PM ESTShipping policy · Return policy · FAQs

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
L
Laura B.
Perfect fit for my stove!

The ignitor replacement fit my pellet stove perfectly and fixed that problem. However, found out we also needed to replace the auger motor so that's on order! Appreciate the quick turn around in getting parts shipped and the quality too. Thank you

V
Valerie M.
Quick and easy, as it should be!

Our King Stove wouldn't light. We reviewed our manual and reviewed the igniter. Perfect! Order it on line and received very quickly. Just in time for the cold night thus far! Thank you!

K
KENNETH H.
GREAT REPLACEMENT PARTS

All parts worked great. I got some bad parts from another seller. But the the replacement parts i got from STOVE & GRILL PARTS FOR LESS WERE EXACT REPLACEMENT PARTS AND VERY GOOD QUALITY
thanks kenneth hayslip

K
Kristen P.

US Stove Igniter 250W (4.65"): 80619

L
LINDA D.

USSC Ignitor for models 5500M, 5500XLT,5510, 5600, 5700 4840 5520, #80619

12