Install Instructions For Vogelzang Pellet Stove (200F) High Limit Therm-O-Disc: 80609
1.) Unplug the stove.
2.) Remove any rear or side panels needed to gain access to the switch.
3.) Gently pull the spade connectors from the tabs on the switch.
4.) Unscrew the fasteners holding the switch in place and remove the old switch (If your switch uses a gasket, take care not to damage it when removing the old switch).
5.) Position the new switch and gasket (If used).
6.) Reinstall the previously removed fasteners.
6.) Connect the wires to the new switch (It does not matter which wire goes to which side).
7.) Reinstall any previously removed panels.
8.) Plug in the stove and perform a test burn.