Ashley APC4000 Pellet Stove Glass Installation & Maintenance Kit

Replacement Ashley Pellet Stove Door Glass Installation and Maintenance Kit for stoves that use C-D-031 glass. The kit includes the glass gasket 88174, glass clips 25904, hardware and glass cleaner.

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

This product is a kit containing 8 total items.

Component Technical Specs

Open a part to see its specifications.

1 xConditioning Glass Cleaner

SKU GLASS CLEANER 4oz (opens in new tab)

Quantity In Kit	1
Length (in)	5.425"
Width (in)	2 ½"
Height (in)	1.150"
Volume	4 fl oz. (120 ml)
Weight	6.25 oz

3 x8-32 x 3/8" Black Oxide Phillips Pan Head Screw

SKU 83202(ASH) (opens in new tab)

Quantity In Kit	3
Length (in)	½"
Width (in)	¼"
Height (in)	¼"
Imperial thread	8-32
Head type	PHILIPS PAN
Material	STAINLESS STEEL
Color	BLACK
Threading	8-32
Weight	0.25 oz

1 xBreckwell Glass Gasket 6FT (C-G-033) Fits Many Models, 88174

SKU 88174 (ASH) (opens in new tab)

Quantity In Kit	1
Length (in)	72"
Width (in)	⅜"
Height (in)	³⁄₁₆"
Is self adhesive	Yes
Material	Fiberglass With Graphite Coating
Weight	1.5 oz

3 xUS Stove, Breckwell, Ashley stove glass clip

SKU 25904MB (ASH) (opens in new tab)

Quantity In Kit	3
Length (in)	2"
Width (in)	¾"
Height (in)	⅛"
Weight	.5 oz

Install Instructions For Ashley APC4000 Pellet Stove Glass Installation & Maintenance Kit

Instructional Notes

1.) Make sure your stove is completely shut down and cool to the touch.

2.) Open the main door.

3.) Using a screwdriver remove the screws holding the top retainer in place.

4.) Loosen the screws holding the bottom retainer in place (Normally you will not need to completely remove this retainer).

5.) Gently remove the glass by letting it tip back (Pay attention to how the gasket is placed on the glass).

6.) Install the gasket around the new glass in the same manner as the original gasket was installed on the old glass (If your new glass comes with the gasket installed skip this step).

7.) Slide the new glass into the bottom retainer on the door and gently tighten the screws.

8.) Place the screws and washers back into the top retainer.

9.) Position the top retainer back in place and tighten the screws (Do not over-tighten).

10.) Make sure to wipe any marks off the glass prior to burning the stove.

"Click here for more information!"

Troubleshooting Notes

-It is important to periodically inspect the glass on your unit. If you notice black or brown streaks on certain areas of the glass it may indicate that there is an air leak. Often times a leak in this area can be fixed by gently snugging the retainer screws or by replacing the gasket. If the glass is cracked or has an excessively heavy haze (Cloudy appearance) the glass should be replaced.

This Item Qualifies For Free Shipping With Orders Over $99!