Blaze King Wood Stove Brick Kit (KT1102 NON-CATALYTIC): S.BRICK.KT1102

Replacement For Part Number:

• S.BRICK.KT1102

These are all of the confirmed compatible units for this product. Where To Find Your Make & Model

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

This product is a kit containing 52 total items.

Component Technical Specs

Open a part to see its specifications.

4 xBlaze King Pumice Brick For Wood Stoves (MT)

SKU BK-PUMICE-BRICK-MT (opens in new tab)

Quantity In Kit	4
Length (in)	8 ⅛"
Width (in)	4 ½"
Height (in)	1 ¼"
Material	Pumice
Characteristic	Standard

9 xPumice Firebrick With Angle For Stoves and Fireplaces (8" x 4.5" x 1.25)

SKU PUMICE-BRICK-62 (opens in new tab)

Quantity In Kit	9
Length (in)	8"
Width (in)	4 ½"
Height (in)	1 ¼"
Material	Pumice
Characteristic	Angle

28 x(PP1901)Pumice Firebrick For Stoves and Fireplaces (9" x 4.5" x 1.25")

SKU BK-PUMICE-BRICK-A (opens in new tab)

Quantity In Kit	28
Length (in)	9"
Width (in)	4 ½"
Height (in)	1 ¼"
Thickness (in)	1 ¼"
Material	Pumice
Characteristic	Standard
Weight	1.75 lbs

2 xBlaze King Pumice Brick For Wood Stoves (LP)

SKU BK-PUMICE-BRICK-LP (opens in new tab)

Quantity In Kit	2
Length (in)	9"
Width (in)	2 ½"
Height (in)	1 ¼"
Material	Pumice
Characteristic	Angle

3 xBlaze King Pumice Brick For Wood Stoves (IT)

SKU BK-PUMICE-BRICK-IT (opens in new tab)

Quantity In Kit	3
Length (in)	9"
Width (in)	2 ¾"
Height (in)	1 ¼"
Material	Pumice
Characteristic	Standard

2 xBlaze King Pumice Brick For Wood Stoves (JT)

SKU BK-PUMICE-BRICK-JT (opens in new tab)

Quantity In Kit	2
Length (in)	9"
Width (in)	3 ⅞"
Height (in)	1 ¼"
Material	Pumice
Characteristic	Angle
Weight	1.25 lbs

2 xBlaze King Pumice Brick For Wood Stoves (KT)

SKU BK-PUMICE-BRICK-KT (opens in new tab)

Quantity In Kit	2
Length (in)	9"
Width (in)	2 ⅛"
Height (in)	1 ¼"
Material	Pumice
Characteristic	Angle

2 x(PP1907)Pumice Firebrick For Stoves and Fireplaces (9" x 2" x 1.25")

SKU BK-PUMICE-BRICK-D (opens in new tab)

Quantity In Kit	2
Length (in)	9"
Width (in)	2"
Height (in)	1 ¼"
Material	Pumice
Characteristic	Standard
Weight	12.5 oz

Install Instructions For Blaze King Wood Stove Brick Kit (KT1102 NON-CATALYTIC): S.BRICK.KT1102

Instructional Notes

Install Instructions:

*Before removing any firebrick, please review the brick diagram listed with the part number on our website. *

1.) Start off by laying out your new firebrick on the floor. (It is helpful to lay out each side individually and compare it to the bricks inside the stove. I.E: Rear, right side, left side, bottom).

2.) Inspect the firebox to see if there are any brick retainers that need to be removed. If so remove them at this time.

3.) Remove the existing firebrick. Pay attention to how the bricks come out. (Most of the time the firebricks on the side and rear need to be removed before the brick on the bottom can come out).

4.) Install the new firebrick. (These bricks will be installed in the reverse order in which they were removed).

5.) Reinstall any previously removed retainers.

Troubleshooting Notes

Helpful Tips:

Fire brick help to protect the stove's firebox from damage caused by excessive heat. They also help to reflect and retain heat inside the stove. It is important that fire bricks are installed in the appliance and inspected on a regular basis. It is ok to have a few small cracks in the bricks. If you notice large cracks or missing pieces the bricks should be replaced!

This Item Is Ineligible For Free Shipping