Skip to main content
Skip to main content
Product title:

Castle Pellet Stove Auger Shaft: 720219-AMP

Product rating:
Product price:
$49.99

A $90.00 Savings over the OEM

Product SKU ! 720219-AMP
Product MPN ! 720219
Product availability: In Stock
Bullet point features

Frequently Bought Together

Description

Castle Serenity Pellet Stove Replacement Auger Shaft.  The auger shaft attaches to the auger motor. When rotating, the auger delivers pellets from the hopper to the burn pot, providing fuel for combustion.  The auger shaft is an integral part of the feed system.  


Replacement For Part Number:

  • 720219

View Compatible Models

Compatible Models

    Castle

  • HPS09
  • HPS10
  • HPS10IC
  • Serenity

Technical Specs

Length 9 3/4"

Videos

Instructions

Install Instructions For Castle Pellet Stove Auger Shaft: 720219-AMP

INSTALLATION INSTRUCTIONS:

1.) Disconnect the power from the stove.

2.) Remove the side and rear panels from the unit (You may only need to remove 2 panels).

3.) Loosen the set screw that holds the auger motor to the auger shaft.

4.) Locate and remove the 4 outer bolts that hold the auger motor and U-bracket to the underside of the hopper.

5.) Once removed set the motor & bracket off to the side (You may want to unplug the auger power cord from the circuit board).

6.) Remove the 4 outer bolts that hold the round bottom plate in place and remove the auger (Pay special attention to the upper auger bearing. It may fall out during this step).

7.) Install the new auger shaft (Make sure the upper auger bearing is installed at the top of the shaft prior to this step).

8..) Reinstall the round bottom plate and lower bearing.

7.) Reinstall the auger and U-bracket to the bottom plate (Make sure that the flat side of the auger motor post lines up with the set screw).

8.) Tighten the set screw to the auger shaft.

9.) Plug the auger motor power wire into the harness (If previously unplugged).

10.) Reinstall the side and rear panel & plug in the stove.

Click on the Videos tab above or See ComfortBilts Guide to Auger Testing for more information!

Troubleshooting

Helpful Tips:

At times an auger jam can occur. This could be the reason your auger has stopped turning. Excessive dust, long pellets, or pellets with high moisture content can cause this issue to occur. Click on the Videos tab or check out ComfortBilt's Guide to Auger Testing for more info!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Castle Serenity Pellet Stove Replacement Auger Shaft.  The auger shaft attaches to the auger motor. When rotating, the auger delivers pellets from the hopper to the burn pot, providing fuel for combustion.  The auger shaft is an integral part of the feed system.  


Replacement For Part Number:

  • 720219

View Compatible Models

Technical Specs

Length 9 3/4"

Instructions

Assembly Instructions For Castle Pellet Stove Auger Shaft: 720219-AMP

INSTALLATION INSTRUCTIONS:

1.) Disconnect the power from the stove.

2.) Remove the side and rear panels from the unit (You may only need to remove 2 panels).

3.) Loosen the set screw that holds the auger motor to the auger shaft.

4.) Locate and remove the 4 outer bolts that hold the auger motor and U-bracket to the underside of the hopper.

5.) Once removed set the motor & bracket off to the side (You may want to unplug the auger power cord from the circuit board).

6.) Remove the 4 outer bolts that hold the round bottom plate in place and remove the auger (Pay special attention to the upper auger bearing. It may fall out during this step).

7.) Install the new auger shaft (Make sure the upper auger bearing is installed at the top of the shaft prior to this step).

8..) Reinstall the round bottom plate and lower bearing.

7.) Reinstall the auger and U-bracket to the bottom plate (Make sure that the flat side of the auger motor post lines up with the set screw).

8.) Tighten the set screw to the auger shaft.

9.) Plug the auger motor power wire into the harness (If previously unplugged).

10.) Reinstall the side and rear panel & plug in the stove.

Click on the Videos tab above or See ComfortBilts Guide to Auger Testing for more information!

Troubleshooting

Helpful Tips:

At times an auger jam can occur. This could be the reason your auger has stopped turning. Excessive dust, long pellets, or pellets with high moisture content can cause this issue to occur. Click on the Videos tab or check out ComfortBilt's Guide to Auger Testing for more info!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)