Quadra-Fire Pellet Stove Replacement Control Board
This controller has many updates over earlier versions:
UPDATES:
SRV7000-323 ECO 56401 --- CHANGED FROM 6.9 TO 6.10A CODE. INSTALLED POWER STROKE CODE FOR AUTOCLEAN AND CHANGED TO THE “QUIET” CONVECTION BLOWER CURVE. REV 2 FUEL TABLES ALSO INSTALLED. (1-11-07)
SRV7000-330 ECO 56476 -- RELEASED WITH THE 7.2 CODE. HIGH ELEVATION FUEL TABLES INSTALLED. 2 CONVECTION BLOWER SPEED OPTIONS INSTALLED, 135 & 165 DEGREES TO GET TO THE HIGH BLOWER SPEED & EXHAUST BLOWER STAYS ON DURING THE AUTO-CLEAN CYCLE AND 20 MINUTES AFTER AUTO-CLEAN IS COMPLETED. (8-2-07 // SN 0072232364 INSERT /// SN 0072279399 FS)
SRV7000-456 ECO 58315 -- RELEASED WITH THE 7.3 CODE. MADE SOME UPDATES TO THE EURO FUEL TABLES. (They can be accessed by turning the rotary switch to position 1) REV B --- RELEASED WITH THE 7.4 CODE. ADDRESSED PREVIOUS AUTO-CLEAN PROBLEMS. SN 00700200343 REV C --- RELEASED WITH THE 7.5 CODE. ADDRESSED LOGIC PROBLEM WITH VAC SWITCH & AUGER JAM. REV C ---RELEASED WITH 7.6 CODE. INSTALLED REV 3 FUEL TABLES. 4-6-09 ECO 60611. REV ---RELEASED WITH 8.0 CODE. INSTALLED REV 4 FUEL TABLES.
Prior to buying a new controller for the AE Series please download a copy of the Troubleshooting Manual .PDF to help diagnose problems you may have with your existing controller.
Quadra-Fire
Replacing the control board or motherboard on a Mt Vernon AE or Edge60 is usually the last resort to solve problems. Too often this is usually after you have exhausted all other options and have invested in many new parts that didn't solve the problems at hand.
Where to locate the fuses
There are three fuses. Two fuses are located on the inside of the control board. One fuse is AC and operates the igniter and the other fuse is DC and operates all of the other components. The third fuse is located in the power supply. A fuse will blow should a short occur and shut off power to the appliance. These fuses are located on the power supply assembly and the control board assembly, under the black plastic cover.
