Englander Fiber Baffle Board for 30/50 Series Wood Stoves: AC-30CFB-AMP

Replacement Set of two Fiber Baffle Boards that will fit most Englander models. Each baffle board measures 18-1/2" x 9-1/2" x 1/2".

Replacement For Part Numbers:

• AC-30CFB
• 21652

These are all of the confirmed compatible units for this product. Where To Find Your Make & Model

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

Install Instructions For Englander Fiber Baffle Board for 30/50 Series Wood Stoves: AC-30CFB-AMP

Instructional Documents

• Install Instructions PDF for Englander AC-30CFB

Instructional Notes

(May vary depending on model)

1.) Make sure the fire is completely out and your stove is cool to the touch.

2.) Open the main load door.

3.) Locate the retainer clip and bolt on the first reburn tube.

4.) On most stoves 1-2 of the reburn tubes will need to be removed in order to take out the baffle board.

5.) Spray the bolts holding the retainer clips in place with penetrating oil and let them sit (PB Blaster or WD40 works well).

6.) Remove the first 1-2 retainer clips and reburn tubes (Normally, this will give you enough room to remove the baffle).

7.) Slide the old baffle out and position the new baffle in its place (Make sure the new baffle is positioned correctly. If it is too far forward it may cause issues with the burn).

8.) Reinstall any previously removed tubes and retain clips.

9.) Close the door.

This Item Qualifies For Free Shipping With Orders Over $99!