Englander Top Auger Kit Includes Shaft, Bearing, Locking Collar & Gaskets - NO MOTOR

Notify Me When Available


  • Compatible Models


    • 25-PDV, 55-SHP22, 55-TRP22
    • 25-PDVC, 55-SHP10, 55-SHP10L, 55-TRP10
    • 25-PI, 55-SHP20, 55-TRP20



    Power to the upper feed assembly runs though the hopper lid switch and the pressure switch. When troubleshooting why the upper motor will not feed its a good idea to swap the wires to the lower and upper feed motors to verify that the upper motor works prior to ordering a new motor.

    I wrote an article about this here.

    Units built from 2004 to present have a diagnostic test mode built into the circuit board. This can be used to test the individual electrical components of the unit.

    WARNING: This mode can not be used to operate the stove! Attempting to burn this unit in this mode can cause damage to the unit.

    Note: The stove should be completely empty of fuel and cold when using the diagnostic mode for testing the unit.

    1) Unplug the stove. Locate the low burn air and air on temp buttons at the bottom of the touch pad. To start diagnostic, plug in the stove and then quickly push these buttons at the same time, then release. A number code will appear in the digital readout, this is the reading for the heat sensor. The blower speed number may change some while displayed. This is normal.

    2) At this point press the low burn air button  located at the bottom center of the touchpad. After pushing, a dash appears in the blower speed window.

    3) Press the blower speed up arrow , and release, the exhaust blower will come on and you should see a circle in the blower speed and a dash then appears in the heat range.

    4) Next, press the blower speed down arrow , this will turn on the room air blower and you will see in the display an 8 in the blower speed and the dash in the heat range

    5) Press the heat range down arrow this will turn on the lower auger motor, you will see a circle in the heat range and an 8 in the blower speed.

    6) Press the heat range up arrow next, this will start the auger motor, you will see an 8 in both displays at this time.

    7) The low burn air button at the bottom center of the control board will turn on the auto igniter element, and the red light above the button will light up when pressed, look through the glass in the front door and watch for 2 to 3 minutes for the igniter to start to glow.

    8) To turn off any of these components simply push again the same button that turned it on . To take the unit out of diagnostic mode, unplug the unit and plug it back in, this will reset the control board back into its "run mode".


    Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

    Shipping Info

    This Item Qualifies For Free Shipping With Orders Over $199!

    When Will My Order Ship

    All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 1PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

    How Does Free Shipping Work?

    Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

    Is Expedited Shipping Available?

    We offer both overnight and two day air shipping services for all orders placed within the Continental United States. For information on shipping cut-off times, go to our shipping page.

    Do You Ship To Canada?

    We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

    Do You Ship To Alaska Or Hawii?

    We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

    Do You Ship Outside The US Or Canada?

    Unfortunately, at this time we do not offer international shipping other than to Canada.

    If you wish to calculate shipping for an item which does not qualify for free shipping, or if you would like the cost to expedite your order, please do the following. Add the item you want to order to your cart and click here to be taken to the cart page where you can enter your country, state / province, and zip code for an estimate.

    Shipping Time Estimations

    For information on shipping time estimations, see either the Shipping Information & Transit Times on the cart page, or go to our shipping page.

    Read More About Our Shipping Information

    Customer Reviews

    Based on 4 reviews
    JOSE R.R.
    Auger parts

    Received the parts fast!
    Perfect fit

    Auger Kit

    It works but I think I have another problem. Working on it.

    Albert G.
    Stove parts

    Every parts I order fit perfect thanks

    Michelle S.
    Finally have warmth

    As the Vortex approached Michigan everyone was finding ways to stay warm as our auger wasn't working right. So we ordered the auger out. When we received the parts there was warmth in my house again..It is cheaper to buy the kit compared to individual parts. Thank you for the warmth


    Have a Question?

    Be the first to ask a question about this.

    Ask a Question

    Net Orders Checkout

    Item Price Qty Total
    Subtotal $0.00

    Shipping Address

    Shipping Methods