Skip to main content
Skip to main content
Product title:

Englander Auger Bearing: PU-UCF204-12-AMP

Product rating:
Product price:
$19.99

A $10.00 Savings over the OEM

Product SKU ! PU-UCF204-12-AMP
Product MPN ! PU-UCF204-12
Product availability: In Stock
Bullet point features
'I had no issues with the parts. I replaced 2 motors, bears, gaskets and a lower auger all with the after market parts. Installation was a breeze because all the parts fit perfectly. "-Jeff

Frequently Bought Together

Total Price: $29.97

Description

Englander Pellet Stove Auger Bearing (block bearing) for pellet units.

  • 3/4" bore.
  • Price listed is for one piece (two pieces are on each stove, one per auger).

    These new style auger bearings have a grease fitting, which will prolong the life of the bearing and your auger motor. The new style bearing can replace the old style that did not have a grease fitting.

We highly recommend purchasing a new gasket when replacing the auger bearing.

The bearing gasket comes in two different styles:  The fiberglass (soft, Part PU‐ABG) type (which was primarily used on earlier model units, 2001 and older) and the nylon (hard, Part PU‐ABGN) type (which is used on our current units, 2002 to present). 


    Replacement For Part Numbers:

    • PU-UCF204-12
    • 31320

    View Compatible Models

    UPC: 653341962416

    Compatible Models

      Englander

    • 25-CAB80
    • 25-PAF
    • 25-PDV
    • 25-PDVC
    • 25-PDVE, 55-SHP22E
    • 25-PDVP
    • 25-PFS
    • 25-PI

    Technical Specs

    Length 3 3/8"
    Width 3 3/8"
    Height 1 1/4"
    Diameter of Collar 3/4"

    Instructions

    Install Instructions For Englander Auger Bearing: PU-UCF204-12-AMP

    Remove the access panel from the stove so that you can access the auger motor.  Using a 5/16” socket/open ended wrench or a 3/8” 12 point socket, loosen the auger set bolt , then remove the auger motor.  Next, loosen and remove the four bolts on the auger bearing.  Slide the auger/bearing assembly out.  Remove the ¾” collar on the auger shaft.  Then, using a 1/8” allen wrench, loosen the two set screws on the bearing and slide the bearing off.  (If replacing the bearing only, skip the next step and proceed to install the new bearing.)  The gasket should come with it, but if not, slide the gasket off.  If using the fiberglass gasket, you may need to scrape any residue off the back of the bearing.   To replace, slide the new gasket onto the auger shaft (if replacing the nylon gasket, make sure the smooth side is facing AWAY from the bearing).  Then slide the bearing on, and put the ¾” collar back on, tightening the screw so that you can slide the bearing up close to the collar to tighten the set screws on the bearing.  Reinstall the auger assembly and reinstall the four bolts by hand.  Then, lift the bearing assembly straight up and turn by hand to ensure that it turns freely.  If it does, tighten the bolts using the 5/16” socket/open ended wrench or 3/8” 12 point socket, in a ‘cross’ pattern (tightening the screws that are diagonal from each other).  If it does not turn freely, move the bearing around until the auger turns freely, then tighten the bolts when you find the smoothest rotation.  Reinstall the auger motor by aligning the FLAT side of the motor shaft with the set bolt, and tightening.

    Troubleshooting

    The bearing gasket comes in two different styles:  The fiberglass (soft, Part PU‐ABG) type (which was primarily used on earlier model units, 2001 and older) and the nylon (hard, Part PU‐ABGN) type (which is used on our current units, 2002 to present).  They are both replaced by first removing the auger bearing (PU‐UCF204‐12). 


    Warranty

    Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

    Shipping Information

    This Item Qualifies For Free Shipping With Orders Over $99!

    When Will My Order Ship?

    All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

    Do You Offer Express Shipping?

    Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

    How Does Free Shipping Work?

    Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

    Do You Ship To Canada?

    We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

    Do You Ship To Alaska Or Hawaii?

    We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

    Do You Ship Outside The US Or Canada?

    Unfortunately, at this time we do not offer international shipping other than to Canada.

    Shipping Time Estimations

    For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

    Learn More About Our Shipping Information
    Jump back to product information tab navigation

    Description

    Englander Pellet Stove Auger Bearing (block bearing) for pellet units.
    • 3/4" bore.
    • Price listed is for one piece (two pieces are on each stove, one per auger).

      These new style auger bearings have a grease fitting, which will prolong the life of the bearing and your auger motor. The new style bearing can replace the old style that did not have a grease fitting.

    We highly recommend purchasing a new gasket when replacing the auger bearing.

    The bearing gasket comes in two different styles:  The fiberglass (soft, Part PU‐ABG) type (which was primarily used on earlier model units, 2001 and older) and the nylon (hard, Part PU‐ABGN) type (which is used on our current units, 2002 to present). 


      Replacement For Part Numbers:

      • PU-UCF204-12
      • 31320

      View Compatible Models

      UPC: 653341962416

      Technical Specs

      Length 3 3/8"
      Width 3 3/8"
      Height 1 1/4"
      Diameter of Collar 3/4"

      Instructions

      Install Instructions For Englander Auger Bearing: PU-UCF204-12-AMP

      Remove the access panel from the stove so that you can access the auger motor.  Using a 5/16” socket/open ended wrench or a 3/8” 12 point socket, loosen the auger set bolt , then remove the auger motor.  Next, loosen and remove the four bolts on the auger bearing.  Slide the auger/bearing assembly out.  Remove the ¾” collar on the auger shaft.  Then, using a 1/8” allen wrench, loosen the two set screws on the bearing and slide the bearing off.  (If replacing the bearing only, skip the next step and proceed to install the new bearing.)  The gasket should come with it, but if not, slide the gasket off.  If using the fiberglass gasket, you may need to scrape any residue off the back of the bearing.   To replace, slide the new gasket onto the auger shaft (if replacing the nylon gasket, make sure the smooth side is facing AWAY from the bearing).  Then slide the bearing on, and put the ¾” collar back on, tightening the screw so that you can slide the bearing up close to the collar to tighten the set screws on the bearing.  Reinstall the auger assembly and reinstall the four bolts by hand.  Then, lift the bearing assembly straight up and turn by hand to ensure that it turns freely.  If it does, tighten the bolts using the 5/16” socket/open ended wrench or 3/8” 12 point socket, in a ‘cross’ pattern (tightening the screws that are diagonal from each other).  If it does not turn freely, move the bearing around until the auger turns freely, then tighten the bolts when you find the smoothest rotation.  Reinstall the auger motor by aligning the FLAT side of the motor shaft with the set bolt, and tightening.

      Troubleshooting

      The bearing gasket comes in two different styles:  The fiberglass (soft, Part PU‐ABG) type (which was primarily used on earlier model units, 2001 and older) and the nylon (hard, Part PU‐ABGN) type (which is used on our current units, 2002 to present).  They are both replaced by first removing the auger bearing (PU‐UCF204‐12). 


      Warranty

      Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

      Shipping Info

      This Item Qualifies For Free Shipping With Orders Over $99!

      When Will My Order Ship?

      All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

      Do You Offer Express Shipping?

      Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

      How Does Free Shipping Work?

      Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

      Do You Ship To Canada?

      We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

      Do You Ship To Alaska Or Hawaii?

      We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

      Do You Ship Outside The US Or Canada?

      Unfortunately, at this time we do not offer international shipping other than to Canada.

      Shipping Time Estimations

      For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

      Learn More About Our Shipping Information

      Customer Reviews

      Based on 24 reviews
      100%
      (24)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      D
      Daniel K.
      Auger Bearing

      Bearing fit and was easy to install. Exactly what I was looking for

      C
      Carol W.
      Speedy shipping!

      Thank you for getting our order here sooner than projected! And thank you for correcting our order and getting that order delivered quickly! We will continue to order parts for our pellet stove from you!

      R
      Robert M.

      The parts you sent me worked great and easy to install and the shipping was within a day and a half thanks a lot for your help

      C
      Crystal S.H.

      Englander Auger Bearing, PU-UCF204-12-AMP

      S
      Steven G.

      Quick delivery, parts work as expected and great price!

      123

      QUESTIONS & ANSWERS

      If your question does not concern this specific product, use our contact form

      Have a Question?

      Be the first to ask a question about this.

      Ask a Question

      Customer Reviews

      Based on 24 reviews
      100%
      (24)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      D
      Daniel K.
      Auger Bearing

      Bearing fit and was easy to install. Exactly what I was looking for

      C
      Carol W.
      Speedy shipping!

      Thank you for getting our order here sooner than projected! And thank you for correcting our order and getting that order delivered quickly! We will continue to order parts for our pellet stove from you!

      R
      Robert M.

      The parts you sent me worked great and easy to install and the shipping was within a day and a half thanks a lot for your help

      C
      Crystal S.H.

      Englander Auger Bearing, PU-UCF204-12-AMP

      S
      Steven G.

      Quick delivery, parts work as expected and great price!

      123