Skip to main content
Skip to main content
Product title:

Harman Feeder Motor For Advance, Accentra & Certain XXV (4RPM CCW): 3-20-08752

Product rating:
Product price:
$189.99
Product SKU ! 3-20-08752
Product MPN ! 3-20-08752
Only 6 Left In Stock
Bullet point features

Frequently Bought Together

Description

This "counter-clock-wise" 4 RPM Auger Feed Motor is used on the Accentra-Cast, Advance, and the XXV pellet stoves that have the indirect chain drive feed system. This Gleason-Avery replacement motor is built to the same specification as the original.

Technical Bulletin Product Updates:

  • Cooling Fan: There has been a design update removing the cooling fan from this motor. New motors will not come with it. Replacement fans for old motors are 3-20-08791
  • Gearing: This motor has been designed to operate at a lower torque range for use with the updated chain-drive using a 1:1 sprocket ratio if your sprockets are different sizes, you need to update chain-drive system. We have an OEM complete motor mounting kit, 1-00-06626. We also have an aftermarket kit, 1-00-06626-AMP
  • Accentra-Cast, Advance and XXV pellet stoves WITHOUT a chain drive system use an outboard 'direct-drive' motor that is mounted directly to the auger shaft without the chain system, part # 3-20-00667


Replacement For Part Number:

  • 3-20-08752

View Compatible Models

UPC: 652174636716

Compatible Models

    Harman

  • Accentra Cast FS
  • Advance
  • XXV (Pre: 12871)

Technical Specs

RPM 4
Direction CCW
Amps 0.74
Volts 120
Shaft 5/16"
Connector 2 Female-1/4" spade on 8" leads

Videos

Instructions

Install Instructions For Harman Feeder Motor For Advance, Accentra & Certain XXV (4RPM CCW): 3-20-08752

When securing the motor to this mounting bracket, Harman is nor recommending NOT TO USE the grommet and spacer. Instead, they want you to hard mount the motor to the bracket and forego the use of the grommets. Grommets and spacers must still be used on the original motor mounts that use the reduction gear, however; your stove will run much better if you update all of the parts to the new system, OEM complete motor mounting kit, 1-00-06626. We also have an aftermarket kit, 1-00-06626-AMP

Troubleshooting

  • The motor mount on your stove can become bent from the torque of the auger motor if your feed system becomes jammed. This will cause the chain to keep skipping off of the sprockets, even if the sprockets are replaced. This is most notable on motor mounts that did not have the base support weld.
  • If your mount is bent, there is a good chance that the gears in your auger motor are also damaged. It is suggested to replace the auger motor 3-20-08752 whenever this bracket is replaced.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

This "counter-clock-wise" 4 RPM Auger Feed Motor is used on the Accentra-Cast, Advance, and the XXV pellet stoves that have the indirect chain drive feed system. This Gleason-Avery replacement motor is built to the same specification as the original.

Technical Bulletin Product Updates:

  • Cooling Fan: There has been a design update removing the cooling fan from this motor. New motors will not come with it. Replacement fans for old motors are 3-20-08791
  • Gearing: This motor has been designed to operate at a lower torque range for use with the updated chain-drive using a 1:1 sprocket ratio if your sprockets are different sizes, you need to update chain-drive system. We have an OEM complete motor mounting kit, 1-00-06626. We also have an aftermarket kit, 1-00-06626-AMP
  • Accentra-Cast, Advance and XXV pellet stoves WITHOUT a chain drive system use an outboard 'direct-drive' motor that is mounted directly to the auger shaft without the chain system, part # 3-20-00667


Replacement For Part Number:

  • 3-20-08752

View Compatible Models

UPC: 652174636716

Technical Specs

RPM 4
Direction CCW
Amps 0.74
Volts 120
Shaft 5/16"
Connector 2 Female-1/4" spade on 8" leads

Instructions

Assembly Instructions For Harman Feeder Motor For Advance, Accentra & Certain XXV (4RPM CCW): 3-20-08752

When securing the motor to this mounting bracket, Harman is nor recommending NOT TO USE the grommet and spacer. Instead, they want you to hard mount the motor to the bracket and forego the use of the grommets. Grommets and spacers must still be used on the original motor mounts that use the reduction gear, however; your stove will run much better if you update all of the parts to the new system, OEM complete motor mounting kit, 1-00-06626. We also have an aftermarket kit, 1-00-06626-AMP

Troubleshooting

  • The motor mount on your stove can become bent from the torque of the auger motor if your feed system becomes jammed. This will cause the chain to keep skipping off of the sprockets, even if the sprockets are replaced. This is most notable on motor mounts that did not have the base support weld.
  • If your mount is bent, there is a good chance that the gears in your auger motor are also damaged. It is suggested to replace the auger motor 3-20-08752 whenever this bracket is replaced.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 11 reviews
100%
(11)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Robert F.

Everything worked out great service was excellent I will always call you for parts in future.

J
John K.
Pellet stove parts

I’ve been very satisfied ordering parts for my pellet stove from Stove & Grill Parts. They quickly respond with reliable service.

K
Ken T.
Feed Motor For Harmon Pellet Stove

Absolutely wonderful motor. I installed it extremely easy and it is very quiet. Would recommend this motor to anyone.

K
Karen P.

Harman OEM Feeder Motor 4RPM CCW For Advance, Accentra & Certain XXV Models #[****]

R
Ray A.
Excellent Customer Service

I had an issue with an auger motor o purchased in the spring, since I didn’t use my pellet stove in the summer months my warranty ran out, pellet Stove Parts For Less went the extra mile to help me with the manufacturer for replacement

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form
Ask a Question
  • My Harmon Accentra Pellet Stove feed motor needs to be replaced. The number is 3-20-08762. I can’t find it anywhere, only 3-20-08752. Will this motor fit and operate correctly on my stove

    Hi,
    If your Harman pellet stove has the chain and sprocket feed system, you will need this auger motor, 3-20-08752
    However, if you have the more current version that does not have chain and sprockets, you will need this auger motor, 3-20-00677

Customer Reviews

Based on 11 reviews
100%
(11)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Robert F.

Everything worked out great service was excellent I will always call you for parts in future.

J
John K.
Pellet stove parts

I’ve been very satisfied ordering parts for my pellet stove from Stove & Grill Parts. They quickly respond with reliable service.

K
Ken T.
Feed Motor For Harmon Pellet Stove

Absolutely wonderful motor. I installed it extremely easy and it is very quiet. Would recommend this motor to anyone.

K
Karen P.

Harman OEM Feeder Motor 4RPM CCW For Advance, Accentra & Certain XXV Models #[****]

R
Ray A.
Excellent Customer Service

I had an issue with an auger motor o purchased in the spring, since I didn’t use my pellet stove in the summer months my warranty ran out, pellet Stove Parts For Less went the extra mile to help me with the manufacturer for replacement