Assembly Instructions For
Vogelzang Exhaust Blower Made By Fasco, 80473-AMP
To replace the exhaust blower:
- Unplug the unit
- Open the service panel
- Locate the exhaust blower. If your unit has the original OEM blower, you may have to remove the entire blower assembly if the motor cannot be removed from the hub. This will also involve removing the vent from the end of the assembly. If you have a Breckwell Insert, you will need to remove the entire off-set assembly from the of blower assembly and attach it to the new assembly if you have a hub-less motor.
- Disconnect wiring
- Replace blower assembly along with any gaskets that were disturbed (included).
- Reconnect venting if it was disconnected
- Reattach the wiring
- NOTE: if the venting was removed, make sure to apply RTV silicone to the venting adapter and secure with a single self tapping screw.