Winrich Pellet Stove Vacuum Hose
- Aftermarket Part Learn more about the difference between OEM and AMP parts
- Fits Winrich Perfecta and Dynasty
- 5' Length Enough for any Stove
- Includes Clips
- Diameter of Hole is 1/4"
- See Complete Description
$59.99
$59.99
Parts other customers added to their cart along with this one. Untick any you do not need, then add the rest together.
Total for 3 items $137.97
Replacement Vacuum Hose for Winrich Dynasty and Perfecta Pellet Stoves.
This hose is longer than it needs to be and can be cut a few times. Simply cut off about an inch or somewhere up the hose to a point that’s not brittle and reinsert the hose back on the barb.
Eventually, the hose will need to be replaced. If this does not solve the problem, make sure your venting is free and clear; verify that the combustion blower is spinning…if both are true, then replace the vacuum shutdown switch.
These are all of the confirmed compatible units for this product. Where To Find Your Make & Model
Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.
| Length (in) | 60" |
|---|---|
| Width (in) | ½" |
| Height (in) | ½" |
| Outer Diameter (in) | ½" |
| Diameter of Hole | 1/4" |
| Weight | 6.5 oz |
Wire, terminals and connectors for the job, in case yours are worn or the ones you have do not reach.
Install Instructions For Winrich Pellet Stove Vacuum Hose
Instructional Documents
Instructional Videos
Instructional Notes
E1 code followed by an E2 code at or during startup.
On the top or the back of the combustion blower manifold, there is a hose connected to the pressure switch. This hose is made of low-temperature silicon. Over time, the hose dries out where it connects to the manifold and becomes brittle. Air will leak around the hose and the pressure switches contacts will open and never close causing the error code. This hose is longer than it needs to be and can be cut a few times. Simply cut off about an inch or somewhere up the hose to a point that’s not brittle and reinsert the hose back on the barb. Eventually, the hose will need to be replaced. If this does not solve the problem, make sure your venting is free and clear; verify that the combustion blower is spinning…if both are true, then replace the vacuum switch.
Troubleshooting Notes
E1 code followed by an E2 code at or during startup.
On the top or the back of the combustion blower manifold, there is a hose connected to the pressure switch. This hose is made of low-temperature silicon. Over time, the hose dries out where it connects to the manifold and becomes brittle. Air will leak around the hose and the pressure switches contacts will open and never close causing the error code. This hose is longer than it needs to be and can be cut a few times. Simply cut off about an inch or somewhere up the hose to a point that’s not brittle and reinsert the hose back on the barb. Eventually, the hose will need to be replaced. If this does not solve the problem, make sure your venting is free and clear; verify that the combustion blower is spinning…if both are true, then replace the vacuum switch.
Parts that customers who bought this one also ordered, the most popular first.
This Item Qualifies For Free Shipping With Orders Over $99!
If your question does not concern this part, contact us directly or read our FAQs.
No one has asked about this part yet. Ask us anything specific to it - the wattage, which style or model year it suits, what part numbers it replaces - and we will answer it ourselves.
Every question is read by our team before it appears here, so it will not show up right away - we will email you the answer.
Thank you - we have your question.
Our team reads every question before it appears on this page, so it will not show up here right away. We will send the answer to once we have written it.
If it is urgent, contact us and we will get back to you directly.
Call or email us and we will help you find the right part.
Mon–Sat 9AM–5PM · Sun 10AM–3PM ESTShipping policy · Return policy · FAQsSame-Day Shipping
On most items*
Learn more about same day shipping cutoff times30-Day Returns
Hassle free return policy
Learn more about our return policy90-Day Warranty
Included with purchase
Learn more about our warrantyUSPS
UPS
Shipping cutoff times let you know when our carriers are scheduled to pick your order up. Orders placed after the times below will ship the next morning.
All orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion.
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Call or email us and we will help you find the right part.
Frequently asked questions