Skip to main content
Skip to main content
Product title:

Heatilator Eco Choice Auger Feed Motor: 812-4421-AMP

Product rating:
Product price:
$89.99

A $160.00 Savings over the OEM

Product SKU ! 812-4421 (HEA) AMP
Product MPN ! 812-4421
Product availability: In Stock
Bullet point features

Frequently Bought Together

Description

Heatilator Eco Choice Auger Feed Motor

Replacement 2.4 RPM feed motor for Heatilator Eco Choice pellet stoves. This part is commonly called an auger motor. Includes the motor, wire adaptor, and instructions.

 


Replacement For Part Numbers:

  • 812-4421
  • SRV7000-226
  • 7001-226
  • 7000-020
  • 7000-004

View Compatible Models

UPC: 652174208869

Compatible Models

    Heatilator Eco Choice

  • CAB50
  • PS35
  • PS50

Technical Specs

RPM 2.4
Direction Clockwise
Volts 115/120
Shaft 1/4"
Connector 3 Pin Molex

Instructions

Install Instructions For Heatilator Eco Choice Auger Feed Motor: 812-4421-AMP

This motor runs on line voltage which will be roughly 115v. The yellow square mounted to the motor assembly is a capacitor, which is used to flip the polarity of the motor if the motor is under strain from a jam. If this happens, the motor will temporarily reverse the spin the auger, freeing the jam, when the capacitor cools, the polarity will be restored to the correct direction and feeding will resume.

If your stove is not feeding but the motor is turning, you may be turning backwards.


  • the capacitor will reverse polarity if the heat from the stove is warming the capacitor. Make sure the wires are hanging from the proper mounts and not hanging on top of the exhaust blower.
  • When testing the auger, there MUST be at least 1lb of pellets in the hopper to close the pressure switch under normal conditions


If your stove will not feed:


  1. Unplug the appliance, remove the control box, re-install the control box, and plug the appliance back in. A blue light should blink once to six times. Verify these blinks against your stove and set the program accordingly. See Control Box Programming.
  2. Turn on stove, verify the exhaust blower is "ON"
  3. Turn on the thermostat - the thermostat indicator light should come on and feed cycle should start.
  4. If the feed system does not come on: – Check the vacuum switch – Check the hopper switch (if equipped) - Check the wire harness – Replace #2 snap disc.

Troubleshooting

Heatilator Eco-Choice Troubleshooting Manual.PDF


Call light on with no fire and no fuel in fire pot

1. Check hopper for bridging of pellets

2. Push reset button and adjust feed adjustment plate

3. Check thermocouple

4. Check venting system for obstructions

5. Check vacuum switch and vacuum hose

6. Check feed motor

7. Check exhaust blower



Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

  • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
  • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE

Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Heatilator Eco Choice Auger Feed Motor

Replacement 2.4 RPM feed motor for Heatilator Eco Choice pellet stoves. This part is commonly called an auger motor. Includes the motor, wire adaptor, and instructions.

 


Replacement For Part Numbers:

  • 812-4421
  • SRV7000-226
  • 7001-226
  • 7000-020
  • 7000-004

View Compatible Models

UPC: 652174208869

Technical Specs

RPM 2.4
Direction Clockwise
Volts 115/120
Shaft 1/4"
Connector 3 Pin Molex

Instructions

Install Instructions For Heatilator Eco Choice Auger Feed Motor: 812-4421-AMP

This motor runs on line voltage which will be roughly 115v. The yellow square mounted to the motor assembly is a capacitor, which is used to flip the polarity of the motor if the motor is under strain from a jam. If this happens, the motor will temporarily reverse the spin the auger, freeing the jam, when the capacitor cools, the polarity will be restored to the correct direction and feeding will resume.

If your stove is not feeding but the motor is turning, you may be turning backwards.


  • the capacitor will reverse polarity if the heat from the stove is warming the capacitor. Make sure the wires are hanging from the proper mounts and not hanging on top of the exhaust blower.
  • When testing the auger, there MUST be at least 1lb of pellets in the hopper to close the pressure switch under normal conditions


If your stove will not feed:


  1. Unplug the appliance, remove the control box, re-install the control box, and plug the appliance back in. A blue light should blink once to six times. Verify these blinks against your stove and set the program accordingly. See Control Box Programming.
  2. Turn on stove, verify the exhaust blower is "ON"
  3. Turn on the thermostat - the thermostat indicator light should come on and feed cycle should start.
  4. If the feed system does not come on: – Check the vacuum switch – Check the hopper switch (if equipped) - Check the wire harness – Replace #2 snap disc.

Troubleshooting

Heatilator Eco-Choice Troubleshooting Manual.PDF


Call light on with no fire and no fuel in fire pot

1. Check hopper for bridging of pellets

2. Push reset button and adjust feed adjustment plate

3. Check thermocouple

4. Check venting system for obstructions

5. Check vacuum switch and vacuum hose

6. Check feed motor

7. Check exhaust blower



Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

  • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
  • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE

Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 38 reviews
97%
(37)
3%
(1)
0%
(0)
0%
(0)
0%
(0)
R
Roy V.V.

Fit perfectly, and runs silent.

N
Nancy T.

Friendly, fast service!

J
Jasper L.

Fast shipping, no problems encountered

J
Joseph C.

The part works great

m
michael m.

Quadra-Fire Auger Feed Motor without Bracket (2.4 RPM): 812-4421-AMP

123

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 38 reviews
97%
(37)
3%
(1)
0%
(0)
0%
(0)
0%
(0)
R
Roy V.V.

Fit perfectly, and runs silent.

N
Nancy T.

Friendly, fast service!

J
Jasper L.

Fast shipping, no problems encountered

J
Joseph C.

The part works great

m
michael m.

Quadra-Fire Auger Feed Motor without Bracket (2.4 RPM): 812-4421-AMP

123
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid