Install Instructions For Snap Disc Fan Switch F100: SNAP-43
Installation:
1.) Unplug the power cord.
2.) Locate the snap switch (On free standing stoves you may need to remove a side panel to gain access. On inserts you may need to pull the unit forward).
3.) Unplug both spade connectors from the active switch.
4.) Using a small screwdriver remove both screws holding the switch plate in place.
5.) Install your new switch into the recess.
6.) Reinstall both screws.
7.) Plug both spade connectors onto the new switch (The orientation of the wires on this switch does not matter).
8.) Reinstall the side plate.
9.) Plug the power cord back into the unit.