Harman Gas Stove Replacement Parts

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

Replacement Burn Pot and Tailpipe Gasket for Harman Stoves. This item contains one gasket for the exhaust tailpipe and one gasket for the burnpot. ...

Replacement silicone docking gasket for all Harman pellet stove inserts. Older versions of this gasket were red in color, this is the replacement f...

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

Harman Burn Pot Gasket, 1-00-07381 (Burn Pot Gasket Only) The burn pot gasket goes between the burn pot and the body of the stove and prevents comb...

Replacement Tailpipe Gasket for Harman Stoves. This is the gasket that seals the stove to the appliance collar (tailpipe) that connects to the vent...

This Harman Pellet Stove Hopper Lid Gasket is compatible with all Harman stoves and inserts that have a glass hopper lid and the 60 Series HHT Boil...

This is a flat braided gasket that is 1/4" wide and 7.5' long with an adhesive backing. Harman uses this gasket to create an air seal between the d...

Harman Tadpole Gasket with Self-Adhesive is used on the door of the Harman Advance pellet stove after Post January 8, 2005. Advance models made pri...

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

Harman gasket, tadpole/bulb style with PSA self-adhesive. Gasket is 1 1/2" x 1/2" x 5 feet long.

Ceramic plate overfire replacement gasket for Harman pellet stoves, inserts, and boilers that utilize a burn pot with primary air inlets that over ...

Harman Accentra, XXV 52i & Accentra Insert Glass Gasket Replacement glass gasket for Harman stoves. 3/16 x 10' with PSA self adhesive. Harman ...

This is a flat braided gasket that is 1/4" wide and 15' long with an adhesive backing. Harman uses this gasket to create an air seal between the do...

This 1" flat gasket is used for the following applications: Invincible and Accentra Inserts - mounted on the rack rails to reduce friction when s...

Harman Accentra FS Hopper Lid Glass Gasket, Pre serial # 11340, 3-44-247300 This is a self-adhesive gasket made for earlier model Harman Accentra ...

This 1/4" 10ft. Glass Gasket with Adhesive Is For Harman Stoves.

Harman Ash Door Gasket for the XXV Pellet Stove (G118) 5ft, 1-00-71611 This is the tadpole (flat gasket with a bulbed edge) gasket that is located ...

Harman Air Intake Gasket for pellet most models. This is used to seal the intake flapper to the air intake weldment.

5' long x 5/8" wide Flat glass gasket for Harman older coal and pellet units. This gasket is commonly known as glass tape. It has a self-adhesive b...

This is the gasket that seals the Ultra air intake assembly to the feeder bodyweldment, for Harman pellet stoves.

This is a Dexen ignition system control module for many different fireplaces. Mainly used on Heat-N-Glo, Heatilator, QuadraFire and Harman direct v...

Replacement hopper lid gasket for Harman Pellet and Coal Stoves. Measures 5 feet long with self-adhesive backing. This is also the gasket you want ...

3/8" x 5' Low-density rope gasket for the top load door on the Oakwood and Oakleaf Wood Stove Models. Requires adhesive cement, not RTV silicone, s...

Harman uses this 5/8" round high-density rope gasket for the ash door seal on various pellet, wood, and coal stoker stoves, to include: P38 Pellet...

This gasket set contains one (1) burn pot gasket and one (1) pipe stub gasket. Invincible Insert (not listed by Harman but is verified to work) A...

Replacement pipe stub plate gasket for exhaust pipe stub and fresh air intake pipe stub for Invincible, Accentra, and P35i pellet inserts. Compatib...

This 1/2" round, high-density rope gasket is used to seal doors on the following models: Magnum Stoker - Load Door and Ash Door    (11') MagnaFir...

This rubber pad/ gasket is mounted under the distribution blower motor in the back of the stove to reduce motor noise from being absorbed into the ...

This 1/2" round, high-density rope gasket is used to seal doors on the following models: Magnum Stoker - Load Door and Ash Door  (11') MagnaFire ...

This 1/2" round, high-density rope gasket is used to seal doors on the following models: Magnum Stoker - Load Door and Ash Door   (11') MagnaFire...

Replacement rope door gasket for Harman wood and coal stoves and the Absolute 43, 43-C pellet stove. The gasket is 1/2" round x 10 feet long...

Stove Bright brand High Temperature Paint. Rated to 1200 degrees. Satin black has a higher sheen finish than traditional flat blacks or metallic bl...

Replacement  #8-18 x 1/2” Hex Washer Head Self Drilling Zinc Screw for Harman PB105 panel construction on Harman Pellet Furnaces and Boilers. May a...

Replacement Tek Coated Self-Tapping Stainless Steel Screw 10 x 3/4" for Harman Pellet Stoves. This is the most common self-tapping screw used on Ha...

Harman 929 B-Vent and DV Side pyro ceramic glass (13 3/4 x 5 11/16). Can be used on both left and right sides. If you need both sides you need to o...

Replacement 10 foot medium knit glass tadpole gasket kit for gas stoves and fireplaces. 

Replacement convection distribution blower for select Harman Wood stoves and fireplaces. See compatible tab for motor compatibility.

Replacement Glass For Select Harman Gas Stoves. Replacement For Models: Shadowlight XL, Serenity II HB35 DV Dimensions: 28-7/8" × 18-1/2"

Replacement 1/4-20 Zinc Plated Serrated Flange Lock Nut for securing cast iron panels to stove bodies and Accentra insert surround panels. Has othe...