Skip to main content
Skip to main content
Product title:

Heatilator Eco Choice Feed Auger Shaft Assembly: 3-50-00565

Product rating:
Product price:
$179.99
Product SKU ! 3-50-00565 (HEA)
Product MPN ! 3-50-00565
Only 3 Left In Stock
Bullet point features

Frequently Bought Together

Total Price: $269.97

Description

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot compatible with many Heatilator Eco Choice pellet furnaces and boilers.



Replacement For Part Number:

  • 3-50-00565

View Compatible Models

UPC: 652174895779

Compatible Models

    Heatilator Eco Choice

  • BA100
  • BH105
  • BH60
  • BIO120

Technical Specs

Length 9-3/8"

Videos

Instructions

Install Instructions For Heatilator Eco Choice Feed Auger Shaft Assembly: 3-50-00565

To replace the feed auger shaft:

  1. Unplug your stove
  2. If there are pellets in the hopper
  3. Gain access to the rear of the stove
  4. If your stove has a chain driven feed system, the chain will need to be removed by loosening the white tensioner block from under the chain to create slack and removing the left-side sprocket from the feed motor by loosening the 1/8" allan key screw in the hub of the drive sprocket
  5. If you have direct drive (motor attached directly to the auger shaft), locate the 7/16" motor set screw on the roller cam assembly and loosen it. Disconnect the wires from the motor to the wiring harness and pull on the auger motor. The motor will uninstall with the mounting frame attached to the motor, set this aside.
  6. Open the the fines collection box access door and remove
  7. Lift on the feed plate pusher arm to extend the feed plate out of the feeder body weldment. Remove the feed plate. Sometimes the crossover hose may restrict the full motion of the pusher arm. If so, gently push the hose out of the way so that the pusher arm can be rotated up and fully to the left
  8. Locate the two 1/2" hex screws on the mounting ring that hold the auger shaft in to the feeder weldment. remove these two screws, then remove the mounting ring. Note: different models have different way in which these mounting screws fasten to the weldment. If nuts or threaded couplers are used, locate them and set them, aside, they will be needed to secure the mounting ring again.
  9. Pull the auger shaft from the feeder body. If the auger shaft is difficult to pull out, the shaft can be freed by striking the auger itself with a wooden dowel from inside the the firebox. This will break the seal and allow the auger to come out.
  10. Install your auger shaft. Secure the mounting ring back into the stove and tighten the two hex screws to a uniformed torque (equal tightness)
  11. Reinstall the feed plate and drop the pusher arm down
  12. Reinstall the cam set screw assembly on the auger shaft, with secondary sprocket attached if your stove has a chain drive assembly
  13. Reinstall the auger motor or sprocket assembly and connect to the auger shaft with the 7/16" set screw
  14. Reinstall the drive sprocket and chain if you have a chain drive system and adjust the chain tensioner

Troubleshooting



Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot compatible with many Heatilator Eco Choice pellet furnaces and boilers.



Replacement For Part Number:

  • 3-50-00565

View Compatible Models

UPC: 652174895779

Technical Specs

Length 9-3/8"

Instructions

Assembly Instructions For Heatilator Eco Choice Feed Auger Shaft Assembly: 3-50-00565

To replace the feed auger shaft:

  1. Unplug your stove
  2. If there are pellets in the hopper
  3. Gain access to the rear of the stove
  4. If your stove has a chain driven feed system, the chain will need to be removed by loosening the white tensioner block from under the chain to create slack and removing the left-side sprocket from the feed motor by loosening the 1/8" allan key screw in the hub of the drive sprocket
  5. If you have direct drive (motor attached directly to the auger shaft), locate the 7/16" motor set screw on the roller cam assembly and loosen it. Disconnect the wires from the motor to the wiring harness and pull on the auger motor. The motor will uninstall with the mounting frame attached to the motor, set this aside.
  6. Open the the fines collection box access door and remove
  7. Lift on the feed plate pusher arm to extend the feed plate out of the feeder body weldment. Remove the feed plate. Sometimes the crossover hose may restrict the full motion of the pusher arm. If so, gently push the hose out of the way so that the pusher arm can be rotated up and fully to the left
  8. Locate the two 1/2" hex screws on the mounting ring that hold the auger shaft in to the feeder weldment. remove these two screws, then remove the mounting ring. Note: different models have different way in which these mounting screws fasten to the weldment. If nuts or threaded couplers are used, locate them and set them, aside, they will be needed to secure the mounting ring again.
  9. Pull the auger shaft from the feeder body. If the auger shaft is difficult to pull out, the shaft can be freed by striking the auger itself with a wooden dowel from inside the the firebox. This will break the seal and allow the auger to come out.
  10. Install your auger shaft. Secure the mounting ring back into the stove and tighten the two hex screws to a uniformed torque (equal tightness)
  11. Reinstall the feed plate and drop the pusher arm down
  12. Reinstall the cam set screw assembly on the auger shaft, with secondary sprocket attached if your stove has a chain drive assembly
  13. Reinstall the auger motor or sprocket assembly and connect to the auger shaft with the 7/16" set screw
  14. Reinstall the drive sprocket and chain if you have a chain drive system and adjust the chain tensioner

Troubleshooting



Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)