Skip to main content
Skip to main content
Product title:

Heatilator Eco Choice Burnpot Clean-out Cover With Wingscrews: 1-00-06623-OEM

Product rating:
Product price:
$49.99
Product SKU ! 1-00-06623 (HEA)
Product MPN ! 1-00-06623
Only 5 Left In Stock
Bullet point features
Buy Now Pay Later

Have a Question? Contact Us 24/7 to Ask a Specialist

  • FREE Shipping

    Orders over $99

  • 30-Day Returns

    Hassle free return policy

  • 90-Day Warranty

    Included with purchase

  • Same-Day Shipping

    On most items*

Description

This burn pot cleanout cover with 2 wingscrews is located at the front of all Heatilator Eco Choice Pellet Furnaces and Boilers. Loosening the screws allows you to remove the plate to get access to the interior of the burn pot for cleaning and maintenance of the airways and the igniter.



Replacement For Part Number:

  • 1-00-06623

UPC: 652174610891

Compatible Models

Technical Specs

Length (in) 4 ⅝"
Width (in) 2 ⅜"
Height (in) ⅛"
Weight 4.50 oz

Instructions

Install Instructions For Heatilator Eco Choice Burnpot Clean-out Cover With Wingscrews: 1-00-06623-OEM

Instructional Documents:

Installation:

1.) Make sure the unit is shut down and the stove is cool.

2.) Open the main load door and ash door.

3.) Remove the ash pan (This will give easier access to the cover on most stoves).

4.) Locate the two thumb screws and remove (if the thumb screws are stuck in place, spray a small amount of penetrating oil on the thumb screws and let it sit. A pair of pliers can be used to loosen the screws).

5.) After loosening the screws, the cover plate can be removed. If you are replacing the screws, they can be removed at this time as well.

6.) Position the new cover plate in place and tighten the thumb screws. Do not over-tighten! If you are replacing the screws at this time you should thread both screws into the holes on the bottom of the burn pot first, then position the cover plate in place and tighten each thumb screw.

7.) Confirm that the plate is seated tightly against the bottom of the burn pot and there are no gaps present.

Troubleshooting

-If your stove is not igniting or burning correctly the cover plate should be removed and the inside of the burn pot should be cleaned/vacuumed.

-It is also important to make sure that the cover plate is seated firmly against the bottom of the burn pot. Any gap or opening will allow air to be drawn in at the bottom of the burn pot. This can cause missed ignition and an inefficient burn.

-At times a gap between the cover plate and the bottom of the stove can be resolved by simply tightening the thumb bolts. If the plate is warped it should be replaced.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

This burn pot cleanout cover with 2 wingscrews is located at the front of all Heatilator Eco Choice Pellet Furnaces and Boilers. Loosening the screws allows you to remove the plate to get access to the interior of the burn pot for cleaning and maintenance of the airways and the igniter.



Replacement For Part Number:

  • 1-00-06623

UPC: 652174610891

Technical Specs

Length (in) 4 ⅝"
Width (in) 2 ⅜"
Height (in) ⅛"
Weight 4.50 oz

Instructions

Install Instructions For Heatilator Eco Choice Burnpot Clean-out Cover With Wingscrews: 1-00-06623-OEM

Instructional Documents:

Installation:

1.) Make sure the unit is shut down and the stove is cool.

2.) Open the main load door and ash door.

3.) Remove the ash pan (This will give easier access to the cover on most stoves).

4.) Locate the two thumb screws and remove (if the thumb screws are stuck in place, spray a small amount of penetrating oil on the thumb screws and let it sit. A pair of pliers can be used to loosen the screws).

5.) After loosening the screws, the cover plate can be removed. If you are replacing the screws, they can be removed at this time as well.

6.) Position the new cover plate in place and tighten the thumb screws. Do not over-tighten! If you are replacing the screws at this time you should thread both screws into the holes on the bottom of the burn pot first, then position the cover plate in place and tighten each thumb screw.

7.) Confirm that the plate is seated tightly against the bottom of the burn pot and there are no gaps present.

Troubleshooting

-If your stove is not igniting or burning correctly the cover plate should be removed and the inside of the burn pot should be cleaned/vacuumed.

-It is also important to make sure that the cover plate is seated firmly against the bottom of the burn pot. Any gap or opening will allow air to be drawn in at the bottom of the burn pot. This can cause missed ignition and an inefficient burn.

-At times a gap between the cover plate and the bottom of the stove can be resolved by simply tightening the thumb bolts. If the plate is warped it should be replaced.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customers Also Bought

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)