Install Instructions For Lennox FBK-250 Blower Kit For FBK-250 Fireplace, 80L86
Instructional Documents
Instructional Notes
Installation Instructions:
1) Turn off the fireplace and allow it to cool before proceeding.
2) If the appliance is connected to 120 volt power, disconnect the power.
3) Shut off the gas supply to the fireplace.
4) Open the lower compartment door (either a radiant panel or louver assembly) by pushing simultaneously the left and right side of the door. (The door is hinged at the bottom).
5) Remove the bottom panel or louver assembly by removing the screw at each end of the panel or louver assembly, retain the end spacers, and then pull the panel or the louver assembly from the unit.
For more installation instructions please refer to the link below.