Skip to main content
Skip to main content
Product title:

US Stove Rope Door Gasket (3/8" x 6'): 88033

Product rating:
Product price:
$14.99
Product SKU ! 88033
Product MPN ! 88033
Product availability: In Stock
Bullet point features

Frequently Bought Together

Description

US Stove Company Rope Door Gasket (3/8" x 6'). The door gasket creates a tight seal between the main door and the body of the unit. You should inspect this gasket regularly. If the door gasket does not seal properly you could have a difficult time controlling the burn and smoke/flue gas may enter the room.  If the gasket is damaged or the door will not seal correctly it should be replaced!    

 

Note: This gasket requires the use of gasket cement for installation.


Replacement For Part Number:

  • 88033

Compatible Models

    US Stove Company

  • 1269E Logwood
  • 1660EFE
  • 2400 Window
  • Clayton 1600EF
  • Clayton 1600M
  • Clayton 1602M
  • Clayton 1660E
  • Hot Blast 1303
  • US1269E
  • Wondercoal 2827
  • Wondercoal 2927
  • Wonderluxe B2350
  • Wonderwood 2941

Technical Specs

Diameter 3/8"
Length 6'
Self-Adhesive? No

Instructions

Install Instructions For US Stove Rope Door Gasket (3/8" x 6'): 88033

1.) Make sure the stove is shut down and has completely cooled.

2.) Begin by gently pulling the old gasket out of the channel on the door (You should wear gloves for this step).

3.) Using a flathead screwdriver scrape out any old adhesive from the channel of the door.

4.) Once the channel on the door is clean, apply a bead of gasket cement into the gasket channel on the door.

5.) Starting at the bottom center of the door begin to push your new gasket into the channel.

6.) Once the gasket is in place work your way around the door gently pressing on the gasket to ensure it is seated correctly.

7.) You will likely need to trim the gasket (It is best to start off by trimming a little at a time. If you cut too much off you may not have enough gasket left to complete the seal around the door).

8.) Close the door to confirm that the gasket has been seated correctly.

9.) Keep the door closed until the gasket cement/adhesive cures (This may vary depending on the brand and type of adhesive/cement you use. Some cements require the stove to be fired in order for the adhesive to cure properly. Make sure you follow the directions listed on the back of the sealant/cement tube!)

Troubleshooting

-It is important that there is a good seal between the door and the body of your stove. A poor seal can cause ignition issues, burn problems and allow smoke to enter the room. If you having an issue where the door doesn't seem to seal properly, adjusting the handle or door latch may resolve the issue. If the problem persists or you noticed that the gasket is damaged, the gasket should be replaced!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

US Stove Company Rope Door Gasket (3/8" x 6'). The door gasket creates a tight seal between the main door and the body of the unit. You should inspect this gasket regularly. If the door gasket does not seal properly you could have a difficult time controlling the burn and smoke/flue gas may enter the room.  If the gasket is damaged or the door will not seal correctly it should be replaced!    

 

Note: This gasket requires the use of gasket cement for installation.


Replacement For Part Number:

  • 88033

Compatible Models

    US Stove Company

  • 1269E Logwood
  • 1660EFE
  • 2400 Window
  • Clayton 1600EF
  • Clayton 1600M
  • Clayton 1602M
  • Clayton 1660E
  • Hot Blast 1303
  • US1269E
  • Wondercoal 2827
  • Wondercoal 2927
  • Wonderluxe B2350
  • Wonderwood 2941

Technical Specs

Diameter 3/8"
Length 6'
Self-Adhesive? No

Instructions

Install Instructions For US Stove Rope Door Gasket (3/8" x 6'): 88033

1.) Make sure the stove is shut down and has completely cooled.

2.) Begin by gently pulling the old gasket out of the channel on the door (You should wear gloves for this step).

3.) Using a flathead screwdriver scrape out any old adhesive from the channel of the door.

4.) Once the channel on the door is clean, apply a bead of gasket cement into the gasket channel on the door.

5.) Starting at the bottom center of the door begin to push your new gasket into the channel.

6.) Once the gasket is in place work your way around the door gently pressing on the gasket to ensure it is seated correctly.

7.) You will likely need to trim the gasket (It is best to start off by trimming a little at a time. If you cut too much off you may not have enough gasket left to complete the seal around the door).

8.) Close the door to confirm that the gasket has been seated correctly.

9.) Keep the door closed until the gasket cement/adhesive cures (This may vary depending on the brand and type of adhesive/cement you use. Some cements require the stove to be fired in order for the adhesive to cure properly. Make sure you follow the directions listed on the back of the sealant/cement tube!)

Troubleshooting

-It is important that there is a good seal between the door and the body of your stove. A poor seal can cause ignition issues, burn problems and allow smoke to enter the room. If you having an issue where the door doesn't seem to seal properly, adjusting the handle or door latch may resolve the issue. If the problem persists or you noticed that the gasket is damaged, the gasket should be replaced!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid