Filter your results using the dropdown buttons below
"OEM" or Original Equipment Manufacturer are parts that the stove manufacturer makes themselves or outsources from other suppliers for their specific stove models. When you order replacement parts for your pellet stove directly from a manufacturer or it’s retailers you can be certain that these parts will be “OEM”.
"AMP" is an acronym that stands for After Market Parts. This is equipment that is sourced out directly which cuts out the stove manufacturers hefty markup. AMP equipment works exactly the same as its OEM counterpart, especially when you’re looking at blowers, igniters, fire backs, switches, gaskets and controls, as quite often, they are made by the same exact manufacturer that supplied the OEM parts as you will see with many “Fasco” blowers and “Gleason Avery” auger motors.
Here at Stove Parts 4 Less we like to offer you the choice of the OEM and the AMP version of products whenever possible to save you money. In some cases we like to offer multiple versions of the AMP part where they are made by the same manufacturer as the original or an alternative version at an even lower price. Click here for more on Explaining the difference between OEM and AMP parts for your pellet stove.
How to Operate your Ashley EC95 & BEC95
To build a fire, set the heater's thermostat control known to "High", open the feed door and insert kindling and paper, and light the fire. It is important that you do not use gasoline, kerosene, lighter fluid or similar type liquid fire starters in this heater. Once the fire is lit, close the feed door and add larger pieces of wood as the fire grows. Once the fire is well established and a good bed of coals has formed, you can add fire as often as needed.
It is important to make sure that the feed door and cabinet door is securely closed. Using the heater with the ash door open can cause the heater burn too quickly and too hot, which can damage the heater.
Once the fire is going, you can use the thermostat to adjust the heat appropriately.
The fire and ash doors should be kept closed except when you are adding fuel, stirring the coal bed, or removing ashes. Do not open the feed door without first setting the thermostat to "high" for at least 30 seconds, and always leave the thermostat on "high" for 15 minutes after adding a small amount of fresh wood to the fire.
With proper maintenance and operation procedures, the Ashley EC95 will last for many years. If you need replacement parts such as latches, grates, or firebricks, Stove Parts for Less has what you need. We offer fast and free shipping on orders over $49, so you can get you what you need to get your circulator back up and running!
- 1220 Rte 28A
Wood & Pellet Stove Parts For Less was started over 10 years ago with a simple mission; Provide second-to-none replacement parts for a fraction of the competitions price. Over a decade later our friendly and knowledgeable team are still here doing just that!