Vista Flame VF100 FS Pellet Stove Repair and Replacement Parts

Replacement 120° Ceramic Low Limit Temp Sensor for Select Enviro, Vista Flame, & Regency Pellet Stoves, see compatible. 

Replacement Convection Blower 115V made by Fasco, fits many Enviro stoves (see compatible). Includes: 1 x Hi-Temp Mounting Gasket, 1 x Wiring Adapt...

1 RPM, Clock-wise, "High-Torque" Replacement Auger Motor for all Whitfield, Traditions, Lennox/Whitfield, and IHP Pellet Stoves. NOTE: ALL WHITFIEL...

Replacement auger motor for most Enviro Pellet Stoves, see compatible.    Note compatibility specification:  Omega - Only if your stove came with...

Replacement Stainless Steel Burn Pot Liner For Select Enviro Pellet Stoves (see compatible). 

Replacement Auger Endplate for Enviro Pellet Stoves, see compatible. The auger endplate includes Nylatron style bearing and is a universal replacem...

Replacement Exhaust Blower For Select Enviro Stoves, see compatible. This assembly comes fully assembled, and includes the motor, housing, and gask...

Replacement Firebox Ceramic Wool Installation for Select Enviro Stoves, See Compatible.

Replacement door rope gasket service part for select Enviro pellet stoves, see compatible.

Replacement Control Board Decal For Select Enviro and VistaFlame Pellet Stoves, See Compatible.  **This is the DECAL only, NOT control board**

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

Genuine Replacement Control Panel Decal For Select Models that use the 50-1929 control board, which is the most updated controller version. This  N...

Replacement Enviro 115v Auger Timer Control designed for 3 Second Intervals for Select Pellet Stoves, See Compatible.   

Pellet Stove Convection Blower Gasket.  This gasket creates a seal between the blower and the body of the stove.  This helps ensure that all air be...

Replacement Enviro L120 Ceramic Ignition Temp Sensor for Select Enviro Stoves, See Compatible.   This switch is only used in analog controlled pell...

Replacement Pedestal and Ash Pan Gasket. Replaces hopper lid gasket on Enviro M55 & Milan Insert. 

Replacement Auger Bushings 5/8" ID for Select Enviro (post 2008), Vista Flame (post 2008), and Hudson River Pellet Stoves, see compatible. 

Replacement Glass Gasket for Select Pellet, Gas, & Wood Stoves, see compatible.    Compatibility Notes for Enviro Stoves: EF2/3/4/5, Empress (...

Genuine Enviro Replacement Auger Brass Bushing Set that includes two 3/4" ID brass bushings and one 5/8" ID bushings. Fits Enviro (Pre 2008) And Vi...

Replacement Enviro  160°F Fan "ON" Switch for Most Enviro Stoves, See Compatible.  This sensor switch overrides the room fan control when the back ...

Genuine Enviro Replacement Control Board for Select Stoves  This board can be retrofitted into all recessed control panels simply by mounting the c...

Genuine Replacement 120 Ceramic Fan Temp Sensor for Enviro Stoves and Select Pellet, Wood and Gas models, see compatible.

Replacement 5 amp Control Board Fuse For Select Enviro Stoves. A 5 AMP fuse is used on all control boards as the main system fuse if the circuit bo...

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

Genuine Replacement Enviro Circuit Board Decal with thermostat switch for select models made after July 2006, see compatible.    NOTE: This is the ...

Replacement Control Board made by Sherwood Industries for Select Enviro, Regency, and VistaFlame Stoves, See Compatible. This control board is for ...

Genuine Enviro Replacement Circuit Board Decal for Select Enviro pellet stoves made prior to May 2004. (See Compatible) **THIS IS THE CONTROL PANEL...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

Replacement Enviro 115v Auger Timer Control designed for 3 Second Intervals for Select Pellet Stoves, See Compatible. 

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Genuine Enviro Replacement Control Board (115V) for Select Enviro Stoves, See Below for Compatibility Specifications.  Enviro Pellet Stoves:   EF...

Replacement Enviro Combustion Blower Mounting Gasket for Select Enviro, Hudson River, & Vista Flame Stoves, See Compatible. 

Genuine Enviro Replacement Stainless Steel Burn Pot Liner For Select Models, See Compatible. 

Cleanup the ashes from your stove is a breeze with the new AV15E ash vacuum from US Stove Company. With a 2.5 peak horse power motor and a 6.5 Gall...

Genuine Enviro Replacement Firebox Top Plate for Select Enviro & Vista Flame Stoves, See Compatible. 

This is a replacement wiring adapter with a Male Crimped Terminal Spade to a Female Spade Terminal. Can be used on blowers, auger motors, and more....

Replacement Steel Brick Liner for Select Enviro & VistaFlame Stoves, See Compatible. 

Replacement Low Limit Heat Sensor for Select Enviro, Hudson River, Regency, & VistaFlame Pellet Stoves (see compatible).

Wire connector with 2 male spades and a Molex style connector.

Replacement Auger Endplate Gasket for Enviro  Pellet Stoves, see compatible.  ***Compatible with Enviro stoves made prior to 2008***  

Replacement Steel Brick Liner for Select Enviro & VistaFlame Stoves, See Compatible. 

VistaFlame EC-001 Low Limit Heat Sensor, for all models. VF100, VF100i, VF55, VF70.

Make routine maintenance a breeze with this complete pellet stove service kit. This kit includes everything you need to clean both your stove and ...

Replacement Convection Blower for Select Enviro & VistaFlame Stoves, see compatible. Note: If you are replacing part EF-003 (motor for mode...

4-in-1 Multi-Purpose Wire Service Tool. Cutter, Stripper, Crimper, & Gripper. 7in total overall length.

Genuine Enviro Replacement Auger Plate with Lower Brass Bushing for Select Enviro, Regency, Bosca, and Vista Flame Stoves, see compatible.   

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

Replacement Auger Plate with Lower Brass Bushing for Select Enviro, Regency, and Vista Flame Stoves, see compatible.