Skip to main content
Skip to main content
Product title:

Blaze King Wood Stove Convection Blower (W/ Mounting Grommets): Z4631-AMP

Product rating:
Product price:
$179.99

A $270.00 Savings over the OEM

Product SKU ! Z4631-AMP
Product MPN ! S.Z4631
Product availability: In Stock
Bullet point features

Frequently Bought Together

Description

Blaze King Wood Stove Convection Blower with Mounting Grommets (Wire ends are stripped and can accept various connectors).  This fan is designed to circulate room air around the back and top of the stove / insert. As this room air travels around the unit it becomes heated. This increases the efficiency of the stove by allowing more heat to be transferred into the room and less heat to be lost through the exhaust.

Fits the following Models: PI, 7009, 8003, 9703, 9802 & 2203. 


Replacement For Part Numbers:

  • S.Z4631
  • 150-0719-F
  • Z4631
  • 0791C
  • 0719F
  • Z4600.FAN
  • PP7335

Compatible Models

    Blaze King

  • Princess 29 Insert
  • Princess Insert PI 1010
  • Princess 1010A (Ver 1.12)

Technical Specs

Amps .84

Instructions

Install Instructions For Blaze King Wood Stove Convection Blower (W/ Mounting Grommets): Z4631-AMP

Installation Instructions:

1.) Unplug the unit's power cord.

2.) Locate the blower motor. Free-Standing Stoves: It may be necessary to remove the rear and side panels to gain access to this area. Inserts: Most often the unit needs to be pulled out of the firebox in order to access this location.

3.) Follow the power wires coming off of the existing motor & disconnect them at the first connection (Pay attention to the orientation of the wires and connection location. Often the power wire leads will come from the motor. Other times, there will be two lead wires that run from the unit and connect to tabs on the motor).

4.) Locate the fasteners attaching the fan housing to the unit and remove them.

5.) Position the new blower in place and reattach using the previously removed fasteners.

6.) Reconnect the wires (Pay attention to the wire location).

7.) Free-Standing Stoves: Reinstall any previously removed panels. Inserts: Reposition the insert back into the firebox cavity.

8.) Plug in the unit's power cord.

*On some units, the convection blower will sit in place and is not attached with any fasteners. *

Troubleshooting

Helpful Tips:

Reduced Air Flow-If you feel like your fan is not moving as much air as it did in the past start off by cleaning the fan and surrounding areas. Often times pet hair and dust are drawn into the fan and collect on the blades. This build-up can slow down the rotation of the blower. Sometimes brushing the dust off with a light bristle paint brush and vacuuming out the area will resolve this problem.

Blower Not Rotating-The first step to take is to manually check and see if the fan spins freely. The fan should spin freely in both directions with very little resistance. If the fan feels stuck or you feel resistance it usually indicates that the fan blade is not centered between the grommets. This can also happen if debris is lodged in the fan.

If you are still experiencing issues after trying these steps your blower may need to be replaced.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Blaze King Wood Stove Convection Blower with Mounting Grommets (Wire ends are stripped and can accept various connectors).  This fan is designed to circulate room air around the back and top of the stove / insert. As this room air travels around the unit it becomes heated. This increases the efficiency of the stove by allowing more heat to be transferred into the room and less heat to be lost through the exhaust.

Fits the following Models: PI, 7009, 8003, 9703, 9802 & 2203. 


Replacement For Part Numbers:

  • S.Z4631
  • 150-0719-F
  • Z4631
  • 0791C
  • 0719F
  • Z4600.FAN
  • PP7335

Technical Specs

Amps .84

Instructions

Install Instructions For Blaze King Wood Stove Convection Blower (W/ Mounting Grommets): Z4631-AMP

Installation Instructions:

1.) Unplug the unit's power cord.

2.) Locate the blower motor. Free-Standing Stoves: It may be necessary to remove the rear and side panels to gain access to this area. Inserts: Most often the unit needs to be pulled out of the firebox in order to access this location.

3.) Follow the power wires coming off of the existing motor & disconnect them at the first connection (Pay attention to the orientation of the wires and connection location. Often the power wire leads will come from the motor. Other times, there will be two lead wires that run from the unit and connect to tabs on the motor).

4.) Locate the fasteners attaching the fan housing to the unit and remove them.

5.) Position the new blower in place and reattach using the previously removed fasteners.

6.) Reconnect the wires (Pay attention to the wire location).

7.) Free-Standing Stoves: Reinstall any previously removed panels. Inserts: Reposition the insert back into the firebox cavity.

8.) Plug in the unit's power cord.

*On some units, the convection blower will sit in place and is not attached with any fasteners. *

Troubleshooting

Helpful Tips:

Reduced Air Flow-If you feel like your fan is not moving as much air as it did in the past start off by cleaning the fan and surrounding areas. Often times pet hair and dust are drawn into the fan and collect on the blades. This build-up can slow down the rotation of the blower. Sometimes brushing the dust off with a light bristle paint brush and vacuuming out the area will resolve this problem.

Blower Not Rotating-The first step to take is to manually check and see if the fan spins freely. The fan should spin freely in both directions with very little resistance. If the fan feels stuck or you feel resistance it usually indicates that the fan blade is not centered between the grommets. This can also happen if debris is lodged in the fan.

If you are still experiencing issues after trying these steps your blower may need to be replaced.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 12 reviews
100%
(12)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael P.
Aftermarket Fan

Used on the Montpelier VC stove to replace OEM fan. Much quieter than the OEM and 1/3 the cost!

D
David B.
Lexington Forge Blower Motor

Perfect fit. Not problems with installation and operation. This replacement is quieter than the original blower. We hope it lasts as long as the original.

E
Eric E.
Easy to use

Easily found what I needed. Check out was quick and not difficult. Received product promptly.

R
Robert H.
Vermont Castings blower motor

Generally pleased with the unit but it wasn’t a half hour swap out. I knew it was a aftermarket part and seems to be well made. The 2 mounting brackets and the thermostat and bracket had to be transferred from the original 10 year old blower that was on the Merrimack. At least there were holes drilled to accept the brackets. There was no ground wire only 2 black wires from the motor. The tech guy there said it works fine without the ground wire and does.
The price was right and worth the extra effort to install.

D
Dewey I.

All was well.

123

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form
Ask a Question

  • Is this the correct fan assembly for the Blaze King Insert?

    This blower is listed for the PI, which is the pellet insert

  • how does it attatch to the stove ?

    Using the hardware from your existing blower.

Customer Reviews

Based on 12 reviews
100%
(12)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael P.
Aftermarket Fan

Used on the Montpelier VC stove to replace OEM fan. Much quieter than the OEM and 1/3 the cost!

D
David B.
Lexington Forge Blower Motor

Perfect fit. Not problems with installation and operation. This replacement is quieter than the original blower. We hope it lasts as long as the original.

E
Eric E.
Easy to use

Easily found what I needed. Check out was quick and not difficult. Received product promptly.

R
Robert H.
Vermont Castings blower motor

Generally pleased with the unit but it wasn’t a half hour swap out. I knew it was a aftermarket part and seems to be well made. The 2 mounting brackets and the thermostat and bracket had to be transferred from the original 10 year old blower that was on the Merrimack. At least there were holes drilled to accept the brackets. There was no ground wire only 2 black wires from the motor. The tech guy there said it works fine without the ground wire and does.
The price was right and worth the extra effort to install.

D
Dewey I.

All was well.

123
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid