Skip to main content
Skip to main content
Product title:

Breckwell Dual Convection Blower Motor: 80591-AMP

Product rating:
Product price:
$149.99
Product SKU ! 80591-AMP
Product MPN ! 80591
Product availability: In Stock
Bullet point features

Buy 2 Save 10%. Buy 3+ save 15%!

Description

Breckwell Pellet Stove Dual Convection Blower Motor.  The convection blower is responsible for circulating air around the stove and into room.  If the blower is not working as it should, the amount of heat transferred from the unit into your home may be reduced.  A malfunctioning blower can also cause high-limit switches to trip and error codes.  If the fan has been cleaned thoroughly and is not moving the same volume of air as it once did, it may need to be replaced.    

  



Replacement For Part Number:

  • 80591

Compatible Models

    Breckwell

  • P1002 Big E II

Technical Specs

Length 12.80"
Width 4.5"
Height 4.25"
RPM 3000
CFM 180
Volts 115
Hz 60
Watts 60
Amps 0.70

Videos

Instructions

Install Instructions For Breckwell Dual Convection Blower Motor: 80591-AMP

1.) Loosen and remove the three screws along the backside of the stove that secure the side panel to the unit.


2.) Pull the side panel down and away from the top of the stove.


3.) Locate the control board and unplug the white Molex plug at the bottom of the control board (Be careful not to pull the wires loose from the plug).


4.) Remove the rear panel of the stove.


5.) Locate and unplug, the two wires leading from the blower motor to the wiring harness.


6.) Remove the bolts holding the blower motor to the stove and remove the blower. (Now is a good time to check the gasket between your blower motor and the stove).


7.) Position the new motor and gasket in place and reinstall the previously removed bolts.


8.) Reconnect the wiring harness to the two leads coming from the new blower motor.


9.) Reinstall the rear panel.


10.) Reconnect the Molex plug to the bottom of the control panel.


11.) Reinstall the side panel.


12.) Plug in the stove and test the blower.

Troubleshooting

-The distribution blower is the fan responsible for blowing hot air into the room. Often times this blower will become coated in dust and pet hair. If you feel like the blower is not moving as much air as it once did, the motor should be cleaned. If this does not resolve the issue the motor may need to be replaced.


-Many stoves are also equipped with a high-limit sensor. If your high-limit sensor is tripping or you are receiving a high-limit error code on your board this may indicate that the blower is not moving as much air as it should.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Breckwell Pellet Stove Dual Convection Blower Motor.  The convection blower is responsible for circulating air around the stove and into room.  If the blower is not working as it should, the amount of heat transferred from the unit into your home may be reduced.  A malfunctioning blower can also cause high-limit switches to trip and error codes.  If the fan has been cleaned thoroughly and is not moving the same volume of air as it once did, it may need to be replaced.    

  



Replacement For Part Number:

  • 80591

Technical Specs

Length 12.80"
Width 4.5"
Height 4.25"
RPM 3000
CFM 180
Volts 115
Hz 60
Watts 60
Amps 0.70

Instructions

Assembly Instructions For Breckwell Dual Convection Blower Motor: 80591-AMP

1.) Loosen and remove the three screws along the backside of the stove that secure the side panel to the unit.


2.) Pull the side panel down and away from the top of the stove.


3.) Locate the control board and unplug the white Molex plug at the bottom of the control board (Be careful not to pull the wires loose from the plug).


4.) Remove the rear panel of the stove.


5.) Locate and unplug, the two wires leading from the blower motor to the wiring harness.


6.) Remove the bolts holding the blower motor to the stove and remove the blower. (Now is a good time to check the gasket between your blower motor and the stove).


7.) Position the new motor and gasket in place and reinstall the previously removed bolts.


8.) Reconnect the wiring harness to the two leads coming from the new blower motor.


9.) Reinstall the rear panel.


10.) Reconnect the Molex plug to the bottom of the control panel.


11.) Reinstall the side panel.


12.) Plug in the stove and test the blower.

Troubleshooting

-The distribution blower is the fan responsible for blowing hot air into the room. Often times this blower will become coated in dust and pet hair. If you feel like the blower is not moving as much air as it once did, the motor should be cleaned. If this does not resolve the issue the motor may need to be replaced.


-Many stoves are also equipped with a high-limit sensor. If your high-limit sensor is tripping or you are receiving a high-limit error code on your board this may indicate that the blower is not moving as much air as it should.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 55 reviews
96%
(53)
4%
(2)
0%
(0)
0%
(0)
0%
(0)
R
Robert M.

Not my first purchase from Stove Parts; but the communications at each stage of processing and shipping are first rate. The website is easy to use. The payment process, especially cross-border, is excellent. Will be buying again!!

R
Robert H.

Did what it was supposed to do. Very happy.

R
RANDALL S.
Good description

Exactly the part they said it is. works like it should time will tell if it’s really that well built. It looks like it is. The only difference is anyone has a ground wire that the original one did not. Apparently the ground wire isn’t needed.

B
Benjamin K.
Very satisfied

Quality product. Arrived when expected

J
John H.
Blower pellet stove

Looks right

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 55 reviews
96%
(53)
4%
(2)
0%
(0)
0%
(0)
0%
(0)
R
Robert M.

Not my first purchase from Stove Parts; but the communications at each stage of processing and shipping are first rate. The website is easy to use. The payment process, especially cross-border, is excellent. Will be buying again!!

R
Robert H.

Did what it was supposed to do. Very happy.

R
RANDALL S.
Good description

Exactly the part they said it is. works like it should time will tell if it’s really that well built. It looks like it is. The only difference is anyone has a ground wire that the original one did not. Apparently the ground wire isn’t needed.

B
Benjamin K.
Very satisfied

Quality product. Arrived when expected

J
John H.
Blower pellet stove

Looks right