Install Instructions For Breckwell Pellet Stove (170 Degree) High Limit Snap Disc: 80390
Instructional Notes
1.) Unplug the stove.
2.) Remove any rear or side panels needed to gain access to the switch.
3.) Gently pull the spade connectors from the tabs on the switch.
4.) Unscrew the fasteners holding the switch in place.
5.) Position the new switch and reinstall the previously removed fasteners.
6.) Connect the wires to the new switch (It dose not matter which wire goes to which side).
7.) Reinstall any previously removed panels.
8.) Plug in the stove and perform a test burn.