Skip to main content
Skip to main content
Product title:

Char-Griller Igniter Fire Rod With Wire For 9020 & 9040 Series Pellet Grills: 551003-AMP

Product rating:
Product price:
$24.99
Product SKU ! 551003-AMP
Product MPN ! 551003
Product availability: In Stock
Bullet point features

Frequently Bought Together

Description

Replacement igniter for Char-Griller 9040 Heavy-Duty Pellet Grill & 9020 Wood Pro Pellet Grill. The Igniter is a replacement device which heats up and lights your pellets in the fire pot. Measures 3-11/16″ long. High-density Cartridge heating element of 200 Watts, 120 Volts, and 24″ lead fiberglass insulated wire. Designed to provide continuous sheath temperatures up to 1,200° F.


Replacement For Part Number:

  • 551003

Compatible Models

    Char-Griller

  • Heavy Duty
  • Wood Fire Pro

Technical Specs

Igniter Length 3-11/16"
Cord Length 24"
Diameter .367"
Watts 200
Volts 120

Instructions

Troubleshooting

Troubleshooting Igniters:

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Replacement igniter for Char-Griller 9040 Heavy-Duty Pellet Grill & 9020 Wood Pro Pellet Grill. The Igniter is a replacement device which heats up and lights your pellets in the fire pot. Measures 3-11/16″ long. High-density Cartridge heating element of 200 Watts, 120 Volts, and 24″ lead fiberglass insulated wire. Designed to provide continuous sheath temperatures up to 1,200° F.


Replacement For Part Number:

  • 551003

Technical Specs

Igniter Length 3-11/16"
Cord Length 24"
Diameter .367"
Watts 200
Volts 120

Troubleshooting

Troubleshooting Igniters:

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 244 reviews
98%
(240)
2%
(4)
0%
(0)
0%
(0)
0%
(0)
P
Phil K.
Top notch

Great job guys, right part, quick service and shipping. I'll be back when the next part breaks. 👍

A
Avon K.

Pit Boss Igniter Hot Rod 200 Watts, 70112-AMP

M
Michael T.

Z-Grill Pellet Grill Igniter-Fits Most Models

J
Jerry T.
Ordered Big horn grill fan motor and control board

The old grill fan motor was blowing fuses, once that was replaced, the new grill motor fan ran as soon as grill was plugged in without controller being turned on, so replaced the control board and now the grill works. Thanks.

E
Edward C.
Igniter Replacement For Grillagrill

Original igniter lasted 5 years and stopped working. The new part purchased was easy to install and has been working great ever since.

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 244 reviews
98%
(240)
2%
(4)
0%
(0)
0%
(0)
0%
(0)
P
Phil K.
Top notch

Great job guys, right part, quick service and shipping. I'll be back when the next part breaks. 👍

A
Avon K.

Pit Boss Igniter Hot Rod 200 Watts, 70112-AMP

M
Michael T.

Z-Grill Pellet Grill Igniter-Fits Most Models

J
Jerry T.
Ordered Big horn grill fan motor and control board

The old grill fan motor was blowing fuses, once that was replaced, the new grill motor fan ran as soon as grill was plugged in without controller being turned on, so replaced the control board and now the grill works. Thanks.

E
Edward C.
Igniter Replacement For Grillagrill

Original igniter lasted 5 years and stopped working. The new part purchased was easy to install and has been working great ever since.

Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid